FireCADCalc

Alcoholic Strength: % vol ↔ % mass ↔ Mole Fraction (OIML)

Converts alcoholic strength by volume at 20 °C to strength by mass, mole fraction, density at 20 °C and ethanol g/L on the OIML R 22 basis (Tables III and IV).

Distillery and ethanol

Inputs

Examples: 40 % volTable IIIb: 50 % mass = 57.89 % volRectified spirit 96 % vol

Results

Strength by mass50.000%
Strength by volume at 20 °C57.889%
Density at 20 °C913.77kg/m³
Ethanol content456.89g/L
Mole fraction of ethanol28.112%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 40 % vol. The inputs, in the units selected above:

InputValue
Strength entered as% vol (by volume at 20 °C)
Alcoholic strength40.000 %

Applying the formula below gives:

ResultValue
Strength by mass33.300 %
Strength by volume at 20 °C40.000 %
Density at 20 °C948.05 kg/m³
Ethanol content315.70 g/L
Mole fraction of ethanol16.334 %

Open this example in the calculator and change any input.

Formula

\(q = p\,\frac{\rho_{20}(p)}{\rho_{20}(1)}, \quad \rho_{20}(1) \approx 789.24\ \mathrm{kg/m^3}\)

\(c_e = p\,\rho_{20}, \quad x_e = \frac{p/M_e}{p/M_e + (1 - p)/M_w}\)

Variables

Symbol Meaning SI unit
\(\text{basis}\) Strength entered as -
\(s\) Alcoholic strength -
\(p\) Strength by mass -
\(q\) Strength by volume at 20 °C -
\(\rho_{20}\) Density at 20 °C kg/m³
\(c_e\) Ethanol content kg/m³
\(x_e\) Mole fraction of ethanol -
\(M_e, M_w\) Molar masses of ethanol and water kg/kmol

Method and standards

R 22 definitions with the R 22 density formula.

Where it is used

  • Converting between excise (% vol) and process (% mass, mole fraction) bases.
  • Distillation design from product specifications.

Common mistakes

  • Mixing % vol at 20 °C with a reading at another temperature.
  • Treating % vol as additive in blends.

Assumptions and limits

  • Binary ethanol–water.

References

  • OIML R 22 (1973)
  • Alcoholometry
  • and International Alcoholometric Tables (1975): formula of Wagenbreth and Blanke
  • pp. 12–13
  • Mole fraction from IUPAC molar masses (ethanol 46.07, water 18.015 kg/kmol)

Questions and answers

Why is % mass lower than % vol?

Ethanol is lighter than water: 40 % vol is about 33.3 % mass.

Why use mole fraction?

Distillation equilibrium (x–y diagrams) is written in mole fractions; 96 % vol is about 0.86 mole fraction.

Is g/L the same as % vol × 7.89?

Yes at 20 °C: ethanol g/L = q × 789.24 = p × ρ20.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.