Worked example
Example: 1 000 L of 96 % + 1 500 L of 10 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Spirit 1 volume at 20 °C | 1,000.0 L |
| Spirit 1 strength | 96.000 % |
| Spirit 2 volume at 20 °C | 1,500.0 L |
| Spirit 2 strength | 10.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Blend volume at 20 °C | 2,434.3 L |
| Blend strength by volume | 45.599 % |
| Blend strength by mass | 38.348 % |
| Contraction | 65.714 L |
Open this example in the calculator and change any input.
Formula
\(m_i = V_i\,\rho_{20}(p_i), \quad p_m = \frac{\sum m_i p_i}{\sum m_i}, \quad V_m = \frac{\sum m_i}{\rho_{20}(p_m)}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(V_1\) | Spirit 1 volume at 20 °C | m³ |
| \(q_1\) | Spirit 1 strength | - |
| \(V_2\) | Spirit 2 volume at 20 °C | m³ |
| \(q_2\) | Spirit 2 strength | - |
| \(V_m\) | Blend volume at 20 °C | m³ |
| \(q_m\) | Blend strength by volume | - |
| \(p_m\) | Blend strength by mass | - |
| \(V_1 + V_2 - V_m\) | Contraction | m³ |
Method and standards
Mass balance with R 22 densities.
Where it is used
- Blending rectified spirit for potable products.
- Fuel-ethanol tank mixing.
Common mistakes
- Adding volumes.
- Blending at different temperatures without correction.
Assumptions and limits
- Volumes at 20 °C.
References
- OIML R 22 (1973)
- Alcoholometry
- and International Alcoholometric Tables (1975): formula of Wagenbreth and Blanke
- pp. 12–13
Questions and answers
How is this different from the simple blending calculator?
That one assumes volumes add; this one balances masses and uses R 22 densities, so the blend volume is smaller.
Is absolute alcohol conserved?
Yes: the litres of pure ethanol at 20 °C before and after are the same.
What about temperature?
Enter volumes corrected to 20 °C.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.