FireCADCalc

Alcoholic Strength from Density and Temperature (OIML)

Alcoholic strength by mass and by volume from the density of an ethanol–water mixture measured at any temperature from −20 to +40 °C (OIML R 22 Tables V–VII).

Distillery and ethanol

Inputs

Examples: 948.2 kg/m3 at 20 °CTable I: 905.71 at 30 °C (50 % mass)

R 22 formula range −20 to +40 °C.

Results

Strength by mass33.214%
Strength by volume at 20 °C39.903%
Density at 20 °C948.20kg/m³

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 948.2 kg/m3 at 20 °C. The inputs, in the units selected above:

InputValue
Measured density at t948.20 kg/m³
Temperature of the liquid20.000 °C

Applying the formula below gives:

ResultValue
Strength by mass33.214 %
Strength by volume at 20 °C39.903 %
Density at 20 °C948.20 kg/m³

Open this example in the calculator and change any input.

Formula

\(\rho(p, t) = \rho_{\text{measured}} \Rightarrow p, \quad q = p\,\frac{\rho_{20}(p)}{\rho_{20}(1)}, \quad \rho_{20}(1) \approx 789.24\ \mathrm{kg/m^3}\)

Variables

Symbol Meaning SI unit
\(\rho_t\) Measured density at t kg/m³
\(t\) Temperature of the liquid K
\(p\) Strength by mass -
\(q\) Strength by volume at 20 °C -
\(\rho_{20}\) Density at 20 °C kg/m³

Method and standards

Inversion of the R 22 formula by bisection, as Tables V–VII are built.

Where it is used

  • Laboratory strength by density meter.
  • Checking spirit receivers.

Common mistakes

  • Measuring a sugared or coloured product without distilling.
  • Mixing up density and specific gravity.

Assumptions and limits

  • Binary ethanol–water.
  • Density between pure ethanol and water at t.
  • Below 0 °C dilute mixtures freeze; the R 22 formula is then applied to supercooled liquid and the result has no practical meaning for a frozen sample.
  • The inversion assumes density falls steadily with strength at a fixed temperature, as the R 22 formula does over its range.

References

  • OIML R 22 (1973)
  • Alcoholometry
  • and International Alcoholometric Tables (1975): formula of Wagenbreth and Blanke
  • pp. 12–13

Questions and answers

How is the strength found?

The R 22 formula is solved for the strength by mass that gives the measured density at the measured temperature.

Does a digital density meter need a glass correction?

No, an oscillating-tube meter reports true density; glass instruments need the corrections in the hydrometer calculators.

What if the sample holds sugar or extract?

The result is wrong: distil the sample first.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.