FireCADCalc

Volume Contraction on Mixing Ethanol and Water

Volume, strength and contraction when pure ethanol and water are mixed at 20 °C, from the OIML R 22 densities: 50 L + 50 L gives about 96.5 L.

Distillery and ethanol

Inputs

Examples: 50 L + 50 L40 L ethanol + 60 L water

Results

Volume of the mixture at 20 °C96.463L
Contraction3.5373%
Strength by mass44.155%
Strength by volume at 20 °C51.834%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 50 L + 50 L. The inputs, in the units selected above:

InputValue
Pure ethanol at 20 °C50.000 L
Water at 20 °C50.000 L

Applying the formula below gives:

ResultValue
Volume of the mixture at 20 °C96.463 L
Contraction3.5373 %
Strength by mass44.155 %
Strength by volume at 20 °C51.834 %

Open this example in the calculator and change any input.

Formula

\(p = \frac{V_e\rho_e}{V_e\rho_e + V_w\rho_w}, \quad V_m = \frac{V_e\rho_e + V_w\rho_w}{\rho_{20}(p)}, \quad q = \frac{V_e}{V_m}\)

Variables

Symbol Meaning SI unit
\(V_e\) Pure ethanol at 20 °C m³
\(V_w\) Water at 20 °C m³
\(V_m\) Volume of the mixture at 20 °C m³
\(\Delta V/(V_e + V_w)\) Contraction -
\(p\) Strength by mass -
\(q\) Strength by volume at 20 °C -
\(\rho_e, \rho_w\) Densities of ethanol and water at 20 °C (R 22) kg/m³

Method and standards

Mass balance with R 22 densities at 20 °C.

Where it is used

  • Reducing spirits to bottling strength.
  • Teaching why % vol is not additive.

Common mistakes

  • Adding volumes.
  • Mixing at different temperatures.

Assumptions and limits

  • Both liquids at 20 °C; after mixing, back to 20 °C.

References

  • OIML R 22 (1973)
  • Alcoholometry
  • and International Alcoholometric Tables (1975): formula of Wagenbreth and Blanke
  • pp. 12–13

Questions and answers

Why does the mixture shrink?

Hydrogen bonding packs ethanol and water molecules more closely than in either pure liquid.

Where is contraction largest?

Near 55–60 % vol, about 3.5–3.6 % of the summed volumes.

Is mass conserved?

Yes, only volume shrinks; that is why % vol needs the density tables.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.