Worked example
Example: RS to 42.8 % with water. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Strong spirit strength (% vol at 20 °C) | 94.400 % |
| Weak spirit strength (% vol at 20 °C; 0 for water) | 0 % |
| Target strength (% vol at 20 °C) | 42.800 % |
| Blend volume wanted (at 20 °C) | 1,000.0 L |
Applying the formula below gives:
| Result | Value |
|---|---|
| Strong spirit | 453.39 L |
| Weak spirit or water | 546.61 L |
| Absolute alcohol in the blend | 428.00 L |
Open this example in the calculator and change any input.
Formula
\(V_1 = V_t \frac{s_t - s_2}{s_1 - s_2}, \quad V_2 = V_t - V_1\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(s_1\) | Strong spirit strength (% vol at 20 °C) | - |
| \(s_2\) | Weak spirit strength (% vol at 20 °C; 0 for water) | - |
| \(s_t\) | Target strength (% vol at 20 °C) | - |
| \(V_t\) | Blend volume wanted (at 20 °C) | m³ |
| \(V_1\) | Strong spirit | m³ |
| \(V_2\) | Weak spirit or water | m³ |
| \(AL\) | Absolute alcohol in the blend | m³ |
Method and standards
Alcohol balance.
Where it is used
- Potable spirit reduction.
- Hand sanitiser and solvent blends.
Common mistakes
- Ignoring contraction for exact excise volumes.
Assumptions and limits
- No contraction: the blend comes out a few per cent short of V_t near 40–60 % vol and slightly above the target strength. The spirit blending with contraction calculator corrects for it.
- Strengths and volumes at 20 °C.
References
- Absolute alcohol balance V₁s₁ + V₂s₂ = V_t s_t (volume contraction neglected)
Questions and answers
Why is the blend short?
Ethanol–water mixing contracts the volume.
Exact blending?
Blend on mass with densities from the tables, then check the strength.
Two spirits of the same strength?
No blend can change the strength; choose different strengths.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.