FireCADCalc

Propped Cantilever with Uniform Load

Reactions, fixed-end moment, maximum sagging moment and maximum deflection and its position for a propped cantilever under a uniformly distributed load.

Inputs

Examples: 10 kN/m over 5 m4 kN/m over 3 m25 kN/m over 8 m

Results

Reaction at the prop 3wL/84.5000kN
Reaction at the fixed end 5wL/87.5000kN
Moment at the fixed end wL²/84,500.0N·m
Maximum sagging moment 9wL²/1282,531.2N·m
Maximum deflection4.3871mm
Distance of the maximum deflection from the prop1.2646m

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 10 kN/m over 5 m. The inputs, in the units selected above:

InputValue
Uniform load10.000 kN/m
Span5.0000 m
Young's modulus200.00 GPa
Second moment of area836.00 cm⁴

Applying the formula below gives:

ResultValue
Reaction at the prop 3wL/818.750 kN
Reaction at the fixed end 5wL/831.250 kN
Moment at the fixed end wL²/831,250 N·m
Maximum sagging moment 9wL²/12817,578 N·m
Maximum deflection20.246 mm
Distance of the maximum deflection from the prop2.1077 m

Open this example in the calculator and change any input.

Formula

\(R_A = \frac{3wL}{8}, \quad M_B = \frac{wL^2}{8}, \quad y(x) = \frac{w x (L^3 - 3L x^2 + 2x^3)}{48EI}, \quad x_{max} = \frac{1 + \sqrt{33}}{16} L\)

Variables

Symbol Meaning SI unit
\(w\) Uniform load N/m
\(L\) Span m
\(E\) Young's modulus Pa
\(I\) Second moment of area m⁴
\(R_A\) Reaction at the prop 3wL/8 N
\(R_B\) Reaction at the fixed end 5wL/8 N
\(M_B\) Moment at the fixed end wL²/8 N·m
\(M_{max}\) Maximum sagging moment 9wL²/128 N·m
\(\delta_{max}\) Maximum deflection m
\(x_{max}\) Distance of the maximum deflection from the prop m

Method and standards

Elastic beam theory.

Where it is used

  • Beams built into a wall at one end.
  • Strength of materials examinations.

Common mistakes

  • Swapping the prop and fixed ends.
  • Total load instead of per metre.

Assumptions and limits

  • Prismatic beam; uniform load over the whole span only.
  • No bending stress is computed: divide the larger moment (M_B) by the section modulus.

References

  • Textbook mechanics (Roark's Formulas for Stress and Strain, beam tables)

Questions and answers

10 kN/m over 5 m?

Prop reaction 18.75 kN, fixed end 31.25 kN; fixed-end moment 31.25 kN·m, largest sagging moment 17.6 kN·m.

Where is the largest deflection?

0.4215 L from the prop: (1 + √33)/16.

How stiff compared with simply supported?

Deflection is about 42 % of the simply supported value.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.