Worked example
Example: 10 kN/m over 5 m. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Uniform load | 10.000 kN/m |
| Span | 5.0000 m |
| Young's modulus | 200.00 GPa |
| Second moment of area | 836.00 cm⁴ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Reaction at the prop 3wL/8 | 18.750 kN |
| Reaction at the fixed end 5wL/8 | 31.250 kN |
| Moment at the fixed end wL²/8 | 31,250 N·m |
| Maximum sagging moment 9wL²/128 | 17,578 N·m |
| Maximum deflection | 20.246 mm |
| Distance of the maximum deflection from the prop | 2.1077 m |
Open this example in the calculator and change any input.
Formula
\(R_A = \frac{3wL}{8}, \quad M_B = \frac{wL^2}{8}, \quad y(x) = \frac{w x (L^3 - 3L x^2 + 2x^3)}{48EI}, \quad x_{max} = \frac{1 + \sqrt{33}}{16} L\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(w\) | Uniform load | N/m |
| \(L\) | Span | m |
| \(E\) | Young's modulus | Pa |
| \(I\) | Second moment of area | m⁴ |
| \(R_A\) | Reaction at the prop 3wL/8 | N |
| \(R_B\) | Reaction at the fixed end 5wL/8 | N |
| \(M_B\) | Moment at the fixed end wL²/8 | N·m |
| \(M_{max}\) | Maximum sagging moment 9wL²/128 | N·m |
| \(\delta_{max}\) | Maximum deflection | m |
| \(x_{max}\) | Distance of the maximum deflection from the prop | m |
Method and standards
Elastic beam theory.
Where it is used
- Beams built into a wall at one end.
- Strength of materials examinations.
Common mistakes
- Swapping the prop and fixed ends.
- Total load instead of per metre.
Assumptions and limits
- Prismatic beam; uniform load over the whole span only.
- No bending stress is computed: divide the larger moment (M_B) by the section modulus.
References
- Textbook mechanics (Roark's Formulas for Stress and Strain, beam tables)
Questions and answers
10 kN/m over 5 m?
Prop reaction 18.75 kN, fixed end 31.25 kN; fixed-end moment 31.25 kN·m, largest sagging moment 17.6 kN·m.
Where is the largest deflection?
0.4215 L from the prop: (1 + √33)/16.
How stiff compared with simply supported?
Deflection is about 42 % of the simply supported value.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.