FireCADCalc

Positive Displacement Pump: Slip, Volumetric and Overall Efficiency

Theoretical flow, slip, volumetric efficiency, hydraulic power and overall and mechanical efficiency of a positive displacement pump from a test.

Sugar mill and cogenerationDistillery and ethanolRefinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Gear pump 250 mL/rev, 600 rpmScrew pump 1 L/rev, 1450 rpm

Results

Slip rises with differential pressure and falls with viscosity: compare tests at the same conditions.

Theoretical flow87.000m³/h
Slip7.0000m³/h
Volumetric efficiency91.954%
Hydraulic power13.333kW
Overall efficiency83.333%
Mechanical efficiency90.625%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Gear pump 250 mL/rev, 600 rpm. The inputs, in the units selected above:

InputValue
Displacement per revolution0.25000 L
Speed600.00 rpm
Measured delivery8.5000 m³/h
Differential pressure10.000 bar
Shaft power3.2000 kW

Applying the formula below gives:

ResultValue
Theoretical flow9.0000 m³/h
Slip0.50000 m³/h
Volumetric efficiency94.444 %
Hydraulic power2.3611 kW
Overall efficiency73.785 %
Mechanical efficiency78.125 %

Open this example in the calculator and change any input.

Formula

\(Q_t = V_dN, \quad S = Q_t - Q, \quad \eta_v = \frac{Q}{Q_t}, \quad \eta_o = \frac{Q\Delta p}{P_s}, \quad \eta_m = \frac{\eta_o}{\eta_v}\)

Variables

Symbol Meaning SI unit
\(V_d\) Displacement per revolution m³
\(N\) Speed 1/s
\(Q\) Measured delivery m³/s
\(\Delta p\) Differential pressure Pa
\(P_s\) Shaft power W
\(Q_t\) Theoretical flow m³/s
\(S\) Slip m³/s
\(\eta_v\) Volumetric efficiency -
\(P_h\) Hydraulic power W
\(\eta_o\) Overall efficiency -
\(\eta_m\) Mechanical efficiency -

Method and standards

Definitions.

Where it is used

  • Dosing, fuel oil and molasses pumps.
  • Condition monitoring of gear and screw pumps.

Common mistakes

  • Using nameplate displacement for a worn pump.
  • Measuring flow at a different pressure from the power.

Assumptions and limits

  • Steady test conditions.

References

  • Positive displacement pump definitions (Perry's Chemical Engineers' Handbook, 9th ed. (McGraw-Hill, 2019), sec. 10, positive displacement pumps)

Questions and answers

What is slip?

Liquid leaking back through clearances from discharge to suction; delivery is displacement minus slip.

Why does slip fall with viscosity?

Thicker liquid leaks less through the same clearances; gear pumps on thin liquids show high slip.

What do the defaults give?

250 mL/rev at 600 rpm, 8.5 m³/h at 10 bar on 3.2 kW: 94 % volumetric, 74 % overall.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.