Worked example
Example: Al → Al₂O₃. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Oxide molar mass | 101.96 kg/kmol |
| Oxide density | 3,950.0 kg/m³ |
| Metal molar mass | 26.980 kg/kmol |
| Metal density | 2,700.0 kg/m³ |
| Metal atoms per oxide formula | 2.0000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Pilling–Bedworth ratio | 1.2916 |
| Scale class (0 porous, 1 protective, 2 spalling) | 1.0000 |
Open this example in the calculator and change any input.
Formula
\(PBR = \frac{M_{ox}\rho_m}{nM_m\rho_{ox}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(M_{ox}\) | Oxide molar mass | kg/kmol |
| \(\rho_{ox}\) | Oxide density | kg/m³ |
| \(M_m\) | Metal molar mass | kg/kmol |
| \(\rho_m\) | Metal density | kg/m³ |
| \(n\) | Metal atoms per oxide formula | - |
| \(PBR\) | Pilling–Bedworth ratio | - |
| \(\text{class}\) | Scale class (0 porous, 1 protective, 2 spalling) | - |
Method and standards
Volume ratio.
Where it is used
- High-temperature alloy selection.
- Teaching oxidation.
Common mistakes
- Wrong n (metal atoms per formula).
- Treating PBR as a rate.
Assumptions and limits
- Dense oxide; no porosity.
References
- Pilling and Bedworth (1923)
- J. Inst. Metals 29: 529
Questions and answers
Why does the ratio matter?
It shows whether the oxide fills, under-fills or over-fills the space of the metal it replaced.
Is a ratio of 1–2 always protective?
No: it is necessary rather than sufficient; scale adhesion and ion diffusion also count.
What do the defaults represent?
Aluminium forming Al₂O₃.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.