FireCADCalc

Wind Chill Temperature (NWS 2001 Formula)

Wind chill temperature, how cold it feels on exposed skin, from air temperature and wind speed by the US National Weather Service formula of 2001.

Inputs

Examples: −10 °C, 30 km/h0 °C, 50 km/h−25 °C, 15 km/h

Results

The formula is meant for cold, windy weather; in mild or calm air it has no meaning.

Wind chill temperature-8.1205°C
Felt below the air temperature8.1205K

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: −10 °C, 30 km/h. The inputs, in the units selected above:

InputValue
Air temperature-10.000 °C
Wind speed (at 10 m)30.000 km/h

Applying the formula below gives:

ResultValue
Wind chill temperature-19.495 °C
Felt below the air temperature9.4947 K

Open this example in the calculator and change any input.

Formula

\(T_{wc} = 35.74 + 0.6215T - 35.75V^{0.16} + 0.4275TV^{0.16} \quad (°\mathrm{F},\ \mathrm{mph})\)

Variables

Symbol Meaning SI unit
\(T\) Air temperature K
\(v\) Wind speed (at 10 m) m/s
\(T_{wc}\) Wind chill temperature K
\(\Delta T\) Felt below the air temperature K

Method and standards

NWS 2001.

Where it is used

  • Cold-weather work on outdoor plant.
  • Cold store and blast freezer staff (air movement).

Common mistakes

  • Using km/h in the formula.
  • Applying it in warm weather.

Assumptions and limits

  • The NWS defines wind chill only for air temperatures at or below 10 °C (50 °F) and wind speeds of at least 3 mph (1.34 m/s); the page accepts a wider range for convenience but warns outside it.

  • Exposed face skin.

References

  • US National Weather Service wind chill (2001): 35.74 + 0.6215T − 35.75V^0.16 + 0.4275TV^0.16
  • °F and mph

Questions and answers

−10 °C with a 30 km/h wind?

It feels like about −20 °C.

Can wind chill freeze water above 0 °C?

No; it describes heat loss from skin, not the air temperature.

Which wind speed?

The standard 10 m wind; the formula reduces it to face height.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.