Worked example
Example: One cubic metre. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Volume (choose its unit) | 1.0000 m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| cubic metre | 1.0000 m³ |
| litre | 1,000.0 L |
| millilitre | 1,000,000 mL |
| cubic centimetre | 1,000,000 cm³ |
| cubic inch | 61,024 in³ |
| cubic foot | 35.315 ft³ |
| cubic yard | 1.3080 yd³ |
| US gallon | 264.17 US gal |
| imperial gallon | 219.97 imp gal |
| oil barrel (42 US gal) | 6.2898 bbl |
Open this example in the calculator and change any input.
Formula
\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x\) | Volume (choose its unit) | m³ |
Method and standards
Each unit's factor to the SI unit is held once in the unit registry.
Where it is used
- Reading foreign drawings and data sheets.
- Examinations and everyday engineering.
Common mistakes
- Mixing similar units (US and imperial).
- Rounding factors too early.
Assumptions and limits
- Exact factors where the definition is exact.
References
- Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)
Questions and answers
US or imperial gallon?
US 3.785 L, imperial 4.546 L: about 20 % apart.
An oil barrel?
42 US gallons, about 159 L.
A cubic foot?
About 28.32 L.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.