Worked example
Example: RSI 2. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Thermal resistance (choose its unit) | 2.0000 m²·K/W |
Applying the formula below gives:
| Result | Value |
|---|---|
| m²·K/W | 2.0000 m²·K/W |
| h·m²·°C/kcal | 2.3260 h·m²·°C/kcal |
| h·ft²·°F/Btu (imperial R-value) | 11.357 h·ft²·°F/Btu |
| U-value 1/R | 0.50000 W/(m²·K) |
| U-value, Btu/(h·ft²·°F) | 0.088055 Btu/(h·ft²·°F) |
Open this example in the calculator and change any input.
Formula
\(U = \frac{1}{R}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(R\) | Thermal resistance (choose its unit) | m²·K/W |
| \(U\) | U-value 1/R | W/(m²·K) |
Method and standards
Definitions.
Where it is used
- Insulation specifications.
- Cold store panels.
Common mistakes
- Imperial R used as RSI.
- Adding U-values instead of R-values.
Assumptions and limits
- Steady one-dimensional flow.
References
- U = 1/R; unit definitions per NIST SP 811
Questions and answers
RSI 2.0?
About R-11.4 imperial.
Why 5.68?
One imperial R unit is 0.1761 m²·K/W.
U from R?
U = 1/R for the same element.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.