Worked example
Example: One W/(m·K). The inputs, in the units selected above:
| Input | Value |
|---|---|
| Thermal conductivity (choose its unit) | 1.0000 W/(m·K) |
Applying the formula below gives:
| Result | Value |
|---|---|
| watt per metre kelvin | 1.0000 W/(m·K) |
| milliwatt per metre kelvin | 1,000.0 mW/(m·K) |
| kilocalorie per hour metre °C | 0.85985 kcal/(h·m·°C) |
| Btu per hour foot °F | 0.57779 Btu/(h·ft·°F) |
Open this example in the calculator and change any input.
Formula
\(1\ \mathrm{kcal/(h\,m\,{}^\circ C)} = 1.163\ \mathrm{W/(m\,K)}, \quad 1\ \mathrm{Btu/(h\,ft\,{}^\circ F)} = 1.7307\ \mathrm{W/(m\,K)}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(k\) | Thermal conductivity (choose its unit) | W/(m·K) |
Method and standards
Unit factors.
Where it is used
- Reading older refractory and insulation data.
- US and Indian catalogue comparison.
Common mistakes
- Using thermochemical calories.
- Confusing conductivity with conductance.
Assumptions and limits
- Linear unit factors.
References
- Unit definitions (NIST SP 811; International Table calorie and Btu)
Questions and answers
Which kcal does it use?
The International Table calorie (4.1868 J), the usual one in Indian and European engineering data.
Why do older books use kcal/(h·m·°C)?
It was the metric engineering (MKS) unit before SI; refractory and insulation catalogues still use it.
What do the defaults represent?
One W/(m·K).
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.