FireCADCalc

Thermal Conductivity Unit Converter (W/m·K, kcal/h·m·°C, Btu/h·ft·°F)

Convert thermal conductivity between W/(m·K), mW/(m·K), kcal/(h·m·°C) and Btu/(h·ft·°F), the units of insulation and refractory data.

Thermal power plantProcess steam and utilitiesRefinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: One W/(m·K)One kcal/(h·m·°C)

Results

1 kcal/(h·m·°C) = 1.163 W/(m·K); 1 Btu/(h·ft·°F) = 1.7307 W/(m·K). Insulation values are often quoted in mW/(m·K).

watt per metre kelvin1.0000W/(m·K)
milliwatt per metre kelvin1,000.0mW/(m·K)
kilocalorie per hour metre °C0.85985kcal/(h·m·°C)
Btu per hour foot °F0.57779Btu/(h·ft·°F)

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: One W/(m·K). The inputs, in the units selected above:

InputValue
Thermal conductivity (choose its unit)1.0000 W/(m·K)

Applying the formula below gives:

ResultValue
watt per metre kelvin1.0000 W/(m·K)
milliwatt per metre kelvin1,000.0 mW/(m·K)
kilocalorie per hour metre °C0.85985 kcal/(h·m·°C)
Btu per hour foot °F0.57779 Btu/(h·ft·°F)

Open this example in the calculator and change any input.

Formula

\(1\ \mathrm{kcal/(h\,m\,{}^\circ C)} = 1.163\ \mathrm{W/(m\,K)}, \quad 1\ \mathrm{Btu/(h\,ft\,{}^\circ F)} = 1.7307\ \mathrm{W/(m\,K)}\)

Variables

Symbol Meaning SI unit
\(k\) Thermal conductivity (choose its unit) W/(m·K)

Method and standards

Unit factors.

Where it is used

  • Reading older refractory and insulation data.
  • US and Indian catalogue comparison.

Common mistakes

  • Using thermochemical calories.
  • Confusing conductivity with conductance.

Assumptions and limits

  • Linear unit factors.

References

  • Unit definitions (NIST SP 811; International Table calorie and Btu)

Questions and answers

Which kcal does it use?

The International Table calorie (4.1868 J), the usual one in Indian and European engineering data.

Why do older books use kcal/(h·m·°C)?

It was the metric engineering (MKS) unit before SI; refractory and insulation catalogues still use it.

What do the defaults represent?

One W/(m·K).

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.