FireCADCalc

Temperature Unit Converter (°C, °F, K, °R)

Convert a temperature between degrees Celsius, degrees Fahrenheit, kelvin and degrees Rankine, with the exact defining relations.

Inputs

Examples: 100 °C98.6 °F-40 °C

Results

T(K) = T(°C) + 273.15; T(°F) = 1.8 T(°C) + 32; T(°R) = 1.8 T(K). A temperature difference converts without the offsets.

degree Celsius37.000°C
degree Fahrenheit98.600°F
kelvin310.15K
degree Rankine558.27°R

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 °C. The inputs, in the units selected above:

InputValue
Temperature (choose its unit)100.00 °C

Applying the formula below gives:

ResultValue
degree Celsius100.00 °C
degree Fahrenheit212.00 °F
kelvin373.15 K
degree Rankine671.67 °R

Open this example in the calculator and change any input.

Formula

\(T_K = T_{°C} + 273.15, \quad T_{°F} = 1.8\, T_{°C} + 32, \quad T_{°R} = 1.8\, T_K\)

Variables

Symbol Meaning SI unit
\(T\) Temperature (choose its unit) K

Method and standards

Exact scale definitions: the kelvin by the SI, the Celsius offset 273.15, and the Fahrenheit and Rankine degrees as 5/9 of a kelvin.

Where it is used

  • Reading US and European data sheets.
  • Gas law calculations, which need absolute temperature.
  • Steam tables in °F.

Common mistakes

  • Mixing gauge and absolute values.
  • Rounding a factor early and carrying the error.
  • Converting a difference with an offset (temperatures).

Assumptions and limits

  • Absolute temperatures; for differences drop the offsets.

References

  • SI Brochure (9th ed.) definition of the kelvin and degree Celsius
  • NIST SP 811 (2008)
  • Appendix B conversion factors

Questions and answers

What is 98.6 °F in °C?

37 °C: T(°C) = (T(°F) − 32)/1.8.

At what temperature do °C and °F agree?

−40.

How do I convert a temperature difference?

Without the offsets: 1 K = 1 °C = 1.8 °F = 1.8 °R. A 10 °C rise is an 18 °F rise.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.