FireCADCalc

Mass Unit Converter (kg, tonne, pound, ounce, ton)

Convert a mass between kilograms, grams, milligrams, tonnes, pounds, ounces, grains and US short and UK long tons.

Inputs

Examples: One kilogramOne short ton

Results

The pound is exactly 0.453 592 37 kg.

kilogram907.18kg
gram907,185g
milligram9.0718e+08mg
tonne0.90718t
pound2,000.0lb
ounce32,000oz
grain1.4000e+07gr
short ton (US, 2000 lb)1.0000sh ton
long ton (UK, 2240 lb)0.89286lg ton

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: One kilogram. The inputs, in the units selected above:

InputValue
Mass (choose its unit)1.0000 kg

Applying the formula below gives:

ResultValue
kilogram1.0000 kg
gram1,000.0 g
milligram1,000,000 mg
tonne0.001000 t
pound2.2046 lb
ounce35.274 oz
grain15,432 gr
short ton (US, 2000 lb)0.001102 sh ton
long ton (UK, 2240 lb)9.8421e-04 lg ton

Open this example in the calculator and change any input.

Formula

\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)

Variables

Symbol Meaning SI unit
\(x\) Mass (choose its unit) kg

Method and standards

Each unit's factor to the SI unit is held once in the unit registry.

Where it is used

  • Reading foreign drawings and data sheets.
  • Examinations and everyday engineering.

Common mistakes

  • Mixing similar units (US and imperial).
  • Rounding factors too early.

Assumptions and limits

  • Exact factors where the definition is exact.

References

  • Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)

Questions and answers

Pounds in a kilogram?

About 2.20462.

Ton or tonne?

A tonne is 1000 kg; a US ton 907.18 kg; a UK ton 1016.05 kg.

Grains?

1/7000 lb; still used for moisture in air (gr/lb).

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.