Worked example
Example: 300 lux. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Illuminance (choose its unit) | 300.00 lx |
Applying the formula below gives:
| Result | Value |
|---|---|
| lux | 300.00 lx |
| kilolux | 0.30000 klx |
| foot-candle | 27.871 fc |
| phot | 0.030000 ph |
Open this example in the calculator and change any input.
Formula
\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x\) | Illuminance (choose its unit) | lx |
Method and standards
Each unit's factor to the SI unit is held once in the unit registry.
Where it is used
- Reading foreign drawings and data sheets.
- Examinations and everyday engineering.
Common mistakes
- Mixing similar units (US and imperial).
- Rounding factors too early.
Assumptions and limits
- Exact factors where the definition is exact.
References
- Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)
Questions and answers
300 lux?
About 27.9 foot-candles.
Why 10.76?
A foot-candle is one lumen per square foot.
Typical levels?
Your lighting code sets them by task.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.