Worked example
Example: 100 m³/h. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Volume flow (choose its unit) | 100.00 m³/h |
Applying the formula below gives:
| Result | Value |
|---|---|
| cubic metre per second | 0.027778 m³/s |
| cubic metre per hour | 100.00 m³/h |
| cubic metre per minute | 1.6667 m³/min |
| cubic metre per day | 2,400.0 m³/d |
| megalitre per day (MLD) | 2.4000 ML/d |
| litre per second | 27.778 L/s |
| litre per minute (LPM) | 1,666.7 L/min |
| US gallon per minute | 440.29 US gal/min |
| imperial gallon per minute | 366.62 imp gal/min |
| cubic foot per minute (cfm) | 58.858 ft³/min |
| cubic foot per hour | 3,531.5 ft³/h |
Open this example in the calculator and change any input.
Formula
\(1\ \text{US gal} = 231\ \text{in}^3 = 3.785\,411\,784\ \text{L}, \quad 1\ \text{imp gal} = 4.546\,09\ \text{L}\)
\(1\ \text{ft}^3/\text{min} = 1.699\,011\ \text{m}^3/\text{h}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(Q\) | Volume flow (choose its unit) | m³/s |
Method and standards
Exact definitions of the gallon and the foot (NIST SP 811).
Where it is used
- Pump and fan duties across US, UK and metric data.
- Water and wastewater plants in MLD.
- Compressed air in cfm.
Common mistakes
- Mixing gauge and absolute values.
- Rounding a factor early and carrying the error.
- Converting a difference with an offset (temperatures).
- Mixing US and imperial gallons.
Assumptions and limits
- Volume flows of gases depend on pressure and temperature; this converts units only.
References
- NIST SP 811 (2008)
- Appendix B conversion factors
Questions and answers
How many m³/h is 1 US gpm?
0.2271 m³/h (3.785 L/min). An imperial gallon per minute is 0.2728 m³/h.
What is 2 MLD in m³/h?
83.3 m³/h (2000 m³ a day).
How many m³/h is 1 cfm?
1.699 m³/h.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.