FireCADCalc

Density and Specific Volume Converter (kg/m³, g/cm³, lb/ft³)

Convert a density between kg/m³, g/cm³, kg/L and lb/ft³, and give the specific volume in m³/kg, L/kg and ft³/lb.

Inputs

Examples: Water, 1 000 kg/m³Fuel oil, 0.95 g/cm³Steam at 10 bar, 5.15 kg/m³

Results

Specific volume is the inverse of density.

Density in kg/m³5.1500kg/m³
Density in g/cm³0.005150g/cm³
Density in kg/L0.005150kg/L
Density in lb/ft³0.32150lb/ft³
Specific volume in m³/kg0.19417m³/kg
Specific volume in L/kg194.17L/kg
Specific volume in ft³/lb3.1104ft³/lb

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Water, 1 000 kg/m³. The inputs, in the units selected above:

InputValue
Density (choose its unit)1,000.0 kg/m³

Applying the formula below gives:

ResultValue
Density in kg/m³1,000.0 kg/m³
Density in g/cm³1.0000 g/cm³
Density in kg/L1.0000 kg/L
Density in lb/ft³62.428 lb/ft³
Specific volume in m³/kg0.001000 m³/kg
Specific volume in L/kg1.0000 L/kg
Specific volume in ft³/lb0.016018 ft³/lb

Open this example in the calculator and change any input.

Formula

\(v = \frac{1}{\rho}, \quad 1\ \text{lb/ft}^3 = 16.018\,46\ \text{kg/m}^3\)

Variables

Symbol Meaning SI unit
\(\rho\) Density (choose its unit) kg/m³
\(v\) Specific volume in m³/kg m³/kg

Method and standards

Exact pound and foot definitions (NIST SP 811).

Where it is used

  • Fuel oil and liquid data sheets.
  • Steam and gas specific volumes.
  • Bulk material densities.

Common mistakes

  • Mixing gauge and absolute values.
  • Rounding a factor early and carrying the error.
  • Converting a difference with an offset (temperatures).

Assumptions and limits

  • Units only.

References

  • NIST SP 811 (2008)
  • Appendix B conversion factors

Questions and answers

What is 1 g/cm³ in lb/ft³?

62.43 lb/ft³.

What is specific volume?

Volume per unit mass, the inverse of density: water at 1000 kg/m³ has 0.001 m³/kg.

Is specific gravity the same?

Specific gravity is density divided by a reference density (water); it has no unit.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.