FireCADCalc

Area Unit Converter (m², mm², ft², acre, hectare)

Convert an area between square metres, square millimetres and centimetres, square kilometres, hectares, square inches, feet and yards, and acres.

Inputs

Examples: One square metreOne acre

Results

Areas convert with the square of the length factor.

square metre4,046.9m²
square millimetre4.0469e+09mm²
square centimetre4.0469e+07cm²
square kilometre0.004047km²
hectare0.40469ha
square inch6,272,640in²
square foot43,560ft²
square yard4,840.0yd²
acre1.00000acre

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: One square metre. The inputs, in the units selected above:

InputValue
Area (choose its unit)1.0000 m²

Applying the formula below gives:

ResultValue
square metre1.0000 m²
square millimetre1,000,000 mm²
square centimetre10,000 cm²
square kilometre1.0000e-06 km²
hectare1.0000e-04 ha
square inch1,550.0 in²
square foot10.764 ft²
square yard1.1960 yd²
acre2.4711e-04 acre

Open this example in the calculator and change any input.

Formula

\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)

Variables

Symbol Meaning SI unit
\(x\) Area (choose its unit) m²

Method and standards

Each unit's factor to the SI unit is held once in the unit registry.

Where it is used

  • Reading foreign drawings and data sheets.
  • Examinations and everyday engineering.

Common mistakes

  • Mixing similar units (US and imperial).
  • Rounding factors too early.

Assumptions and limits

  • Exact factors where the definition is exact.
  • The acre is the international acre, 4 046.856 422 4 m²; the US survey acre of older US land records is 4 ppm larger.

References

  • Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)

Questions and answers

Square feet in a square metre?

About 10.7639.

An acre?

About 4046.9 m², 0.4047 ha.

Cable sizes?

Use mm²; AWG has its own calculator.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.