Worked example
Example: One square metre. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Area (choose its unit) | 1.0000 m² |
Applying the formula below gives:
| Result | Value |
|---|---|
| square metre | 1.0000 m² |
| square millimetre | 1,000,000 mm² |
| square centimetre | 10,000 cm² |
| square kilometre | 1.0000e-06 km² |
| hectare | 1.0000e-04 ha |
| square inch | 1,550.0 in² |
| square foot | 10.764 ft² |
| square yard | 1.1960 yd² |
| acre | 2.4711e-04 acre |
Open this example in the calculator and change any input.
Formula
\(x_{\text{unit}} = \frac{x_{SI}}{f_{\text{unit}}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(x\) | Area (choose its unit) | m² |
Method and standards
Each unit's factor to the SI unit is held once in the unit registry.
Where it is used
- Reading foreign drawings and data sheets.
- Examinations and everyday engineering.
Common mistakes
- Mixing similar units (US and imperial).
- Rounding factors too early.
Assumptions and limits
- Exact factors where the definition is exact.
- The acre is the international acre, 4 046.856 422 4 m²; the US survey acre of older US land records is 4 ppm larger.
References
- Unit definitions per NIST SP 811 and the SI Brochure (exact where defined)
Questions and answers
Square feet in a square metre?
About 10.7639.
An acre?
About 4046.9 m², 0.4047 ha.
Cable sizes?
Use mm²; AWG has its own calculator.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.