FireCADCalc

Total Capital Investment: Fixed Capital, Working Capital and Start-Up

Total capital investment from fixed capital, contingency, working capital and start-up costs as shares of fixed capital (Perry's sec. 9).

Thermal power plantSugar mill and cogenerationRefinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: 50 M fixed, 15 % contingency, 15 % WC, 8 % start-upNo contingency

Results

Fixed capital with contingency1.0000e+07
Working capital1,000,000
Start-up costs500,000
Total capital investment1.1500e+07

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 50 M fixed, 15 % contingency, 15 % WC, 8 % start-up. The inputs, in the units selected above:

InputValue
Fixed capital (installed plant)5.0000e+07 -
Contingency share of fixed capital15.000 %
Working capital share of fixed capital (with contingency)15.000 %
Start-up cost share of fixed capital (with contingency)8.0000 %

Applying the formula below gives:

ResultValue
Fixed capital with contingency5.7500e+07
Working capital8,625,000
Start-up costs4,600,000
Total capital investment7.0725e+07

Open this example in the calculator and change any input.

Formula

\(TCI = C_{FC}(1 + c)(1 + w + s)\)

Variables

Symbol Meaning SI unit
\(C_{FC}\) Fixed capital (installed plant) -
\(c\) Contingency share of fixed capital -
\(w\) Working capital share of fixed capital (with contingency) -
\(s\) Start-up cost share of fixed capital (with contingency) -
\(C_{FC}'\) Fixed capital with contingency -
\(C_{WC}\) Working capital -
\(C_{SU}\) Start-up costs -
\(TCI\) Total capital investment -

Method and standards

Perry's capital structure with shares.

Where it is used

  • Feasibility studies.

Common mistakes

  • Leaving out working capital.
  • Double-counting contingency.

Assumptions and limits

  • Working capital and start-up shares are applied to the fixed capital including contingency, C_FC(1 + c), as the formula shows. Shares quoted on fixed capital without contingency should be divided by (1 + c) first.

  • Shares of fixed capital.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 9 (total capital investment = fixed capital + working capital + start-up)

Questions and answers

What is working capital?

Money tied up in stocks, receivables and cash: typically 10–20 % of fixed capital.

Why add start-up costs?

Commissioning, trial runs and early inefficiency cost 5–10 % of fixed capital.

Is land included?

Add land separately; it is not depreciated.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.