FireCADCalc

Backfill and Compacted Fill Volume (Swell and Shrinkage)

Bank and loose volumes of fill to bring, and the truck loads, for a compacted volume from the soil's shrinkage and swell factors.

Inputs

Examples: 500 m3 compactedSand fillClay

Compacted volume is smaller than the bank volume by this share.

Results

Bank volume needed1,263.2m³
Loose volume to bring1,414.7m³
Truck loads (rounded up)89.000

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 500 m3 compacted. The inputs, in the units selected above:

InputValue
Compacted volume required500.00 m³
Shrinkage from bank to compacted10.000 %
Swell from bank to loose25.000 %
Truck capacity (loose)10.000 m³

Applying the formula below gives:

ResultValue
Bank volume needed555.56 m³
Loose volume to bring694.44 m³
Truck loads (rounded up)70.000

Open this example in the calculator and change any input.

Formula

\(V_b = \frac{V_c}{1 - s_h}, \quad V_l = V_b(1 + s_w)\)

Variables

Symbol Meaning SI unit
\(V_c\) Compacted volume required m³
\(s_h\) Shrinkage from bank to compacted -
\(s_w\) Swell from bank to loose -
\(V_t\) Truck capacity (loose) m³
\(V_b\) Bank volume needed m³
\(V_l\) Loose volume to bring m³
\(N\) Truck loads (rounded up) -

Method and standards

Volume factors.

Where it is used

  • Fill and backfill orders.
  • Earthwork planning.

Common mistakes

  • Confusing swell and shrinkage.
  • Truck capacity in compacted volume.

Assumptions and limits

  • Uniform material.

References

  • Bank
  • loose and compacted volume relations (earthmoving practice)

Questions and answers

500 m³ compacted with 10 % shrinkage and 25 % swell?

556 m³ of bank material, 694 m³ loose: 70 loads of 10 m³.

What is shrinkage?

Compacted fill is denser than the soil in its natural bank.

Where do factors come from?

Soil tests or earthmoving handbooks for the material.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.