Worked example
Example: Half-life 8 h, 24 h later. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Value given | Half-life |
| Rate constant | 0.10000 1/h |
| Half-life | 8.0000 h |
| Initial amount (any unit) | 100.00 - |
| Elapsed time | 24.000 h |
Applying the formula below gives:
| Result | Value |
|---|---|
| Rate constant | 0.086643 1/h |
| Half-life | 8.0000 h |
| Mean life 1/k | 11.542 h |
| Amount remaining | 12.500 |
| Fraction remaining | 12.500 % |
Open this example in the calculator and change any input.
Formula
\(N = N_0 e^{-kt}, \quad t_{1/2} = \frac{\ln 2}{k}, \quad \tau = \frac{1}{k}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{given}\) | Value given | - |
| \(k\) | Rate constant | 1/s |
| \(t_{1/2}\) | Half-life | s |
| \(N_0\) | Initial amount (any unit) | - |
| \(t\) | Elapsed time | s |
| \(\tau\) | Mean life 1/k | s |
| \(N\) | Amount remaining | - |
| \(N/N_0\) | Fraction remaining | - |
Method and standards
First-order kinetics.
Where it is used
- Decay of residual chemicals and tracers.
- Radioactive sources in level and density gauges.
Common mistakes
- log₁₀ instead of ln.
- Using it for higher orders.
Assumptions and limits
- First order.
References
- First-order decay N = N₀ e^(−kt)
- t½ = ln 2/k
Questions and answers
Half-life 8 h, after 24 h?
One-eighth remains: 12.5 %.
Mean life?
1/k, about 1.44 half-lives.
Second-order reactions?
Their half-life depends on concentration; this page is first order only.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.