FireCADCalc

Batch Reactor Time for a Conversion (Order n)

Reaction time of a constant-volume batch reactor for a target conversion with nth-order kinetics, and batches per day with the turnaround time.

Refinery and petrochemicalChemical and fertiliser

Inputs

Examples: First order to 95 %Second order to 90 %Order 1.5Zero order

Results

Reaction time6.1803h
Cycle time7.1803h
Batches per day3.3425

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: First order to 95 %. The inputs, in the units selected above:

InputValue
Target conversion95.000 %
Reaction order1.0000 -
Rate constant k·C_A0^(n−1)0.50000 1/h
Turnaround (fill, heat, empty, clean)2.0000 h

Applying the formula below gives:

ResultValue
Reaction time5.9915 h
Cycle time7.9915 h
Batches per day3.0032

Open this example in the calculator and change any input.

Formula

\(t = \frac{(1 - X)^{1-n} - 1}{(n - 1)k'} \ (n \ne 1), \quad t = -\frac{\ln(1 - X)}{k'} \ (n = 1)\)

Variables

Symbol Meaning SI unit
\(X\) Target conversion -
\(n\) Reaction order -
\(k'\) Rate constant k·C_A0^(n−1) 1/s
\(t_a\) Turnaround (fill, heat, empty, clean) s
\(t_r\) Reaction time s
\(t_c\) Cycle time s
\(N_d\) Batches per day -

Method and standards

Integrated rate law.

Where it is used

  • Batch reactors and digesters.
  • Production planning.

Common mistakes

  • Rate constant units for n ≠ 1.
  • Forgetting turnaround.

Assumptions and limits

  • Isothermal, constant volume.
  • k′ is the lumped constant k C_A0^(n−1) in 1/time; convert a rate constant in concentration units first.

References

  • Integrated rate law for −r_A = k C_A^n at constant volume (Levenspiel, Chemical Reaction Engineering)

Questions and answers

95 % at first order, k 0.5 /h?

6.0 h of reaction; with 2 h turnaround 3.0 batches a day.

Why does the last few per cent take so long?

The rate falls as the reactant runs out.

Zero order?

Time is simply X/k' (with k' = k/C_A0).

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.