Worked example
Example: Anisole 452 K (Perry's example: 36.70 kJ/mol). The inputs, in the units selected above:
| Input | Value |
|---|---|
| Temperature | 178.85 °C |
| Critical temperature | 372.45 °C |
| Acentric factor | 0.35017 - |
| Molar mass | 108.14 kg/kmol |
Applying the formula below gives:
| Result | Value |
|---|---|
| Molar heat of vaporisation | 36.697 kJ/mol |
| Specific heat of vaporisation | 339.35 kJ/kg |
| Reduced temperature | 0.70012 |
Open this example in the calculator and change any input.
Formula
\(\frac{\Delta H_v}{RT_c} = 7.08\tau^{0.354} + 10.95\,\omega\,\tau^{0.456}, \quad \tau = 1 - T_r\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(T\) | Temperature | K |
| \(T_c\) | Critical temperature | K |
| \(\omega\) | Acentric factor | - |
| \(M\) | Molar mass | kg/kmol |
| \(\Delta H_v\) | Molar heat of vaporisation | J/mol |
| \(\Delta h_v\) | Specific heat of vaporisation | J/kg |
| \(T_r\) | Reduced temperature | - |
Method and standards
Corresponding-states correlation.
Where it is used
- Reboiler and condenser duties for organics.
- Evaporator design for solvents.
Common mistakes
- Using above T_c.
- Using per-mole results as per-kg.
Assumptions and limits
- Organic compounds; 0.6 < T_r < 1.
References
- Perry's Chemical Engineers' Handbook
- 9th ed. (McGraw-Hill, 2019)
- sec. 2
- Eq. (2-41) (corresponding states, from Poling, Prausnitz and O'Connell) with the anisole example
Questions and answers
What does Perry's example give?
Anisole at 452 K: 36.70 kJ/mol, 2.2 % below the DIPPR value of 37.51.
How is this different from Watson?
Watson scales a known heat of vaporisation to another temperature; this estimates it from critical data alone.
Does it work for water?
Roughly; use the steam tables for water.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.