FireCADCalc

Thermal Conductivity of a Liquid Mixture (Filippov and Li)

Thermal conductivity of a binary liquid mixture from the pure-liquid values by the Filippov mass-fraction correlation and the Li volume-fraction method.

Refinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Diethyl ether–methanol 30.2 mol %, 0 °C (Perry's: 0.160 and 0.167)Toluene–benzene equimolar, 25 °C

Results

Perry's: 4–8 % for both; mixtures fall below the linear average. Aqueous mixtures with strong interactions may differ more. Estimate for design; use measured data where they exist.

Mass fraction of 150.022%
Volume fraction of 152.495%
Mixture conductivity, Filippov0.16024W/(m·K)
Mixture conductivity, Li0.16749W/(m·K)
Mass-fraction average (for comparison)0.17259W/(m·K)

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Diethyl ether–methanol 30.2 mol %, 0 °C (Perry's: 0.160 and 0.167). The inputs, in the units selected above:

InputValue
Conductivity of liquid 10.13830 W/(m·K)
Conductivity of liquid 20.20690 W/(m·K)
Mole fraction of liquid 130.200 %
Molar mass of 174.122 kg/kmol
Molar mass of 232.042 kg/kmol
Molar density of 1 (kmol/m³)9.9335 -
Molar density of 2 (kmol/m³)25.371 -

Applying the formula below gives:

ResultValue
Mass fraction of 150.022 %
Volume fraction of 152.495 %
Mixture conductivity, Filippov0.16024 W/(m·K)
Mixture conductivity, Li0.16749 W/(m·K)
Mass-fraction average (for comparison)0.17259 W/(m·K)

Open this example in the calculator and change any input.

Formula

\(k_{Filippov} = w_1k_1 + w_2k_2 - 0.72w_1w_2|k_2 - k_1|\)

\(k_{Li} = \sum_i\sum_j\phi_i\phi_j\frac{2k_ik_j}{k_i + k_j}, \quad \phi_i = \frac{x_i/\rho_i}{\sum x_j/\rho_j}\)

Variables

Symbol Meaning SI unit
\(k_1\) Conductivity of liquid 1 W/(m·K)
\(k_2\) Conductivity of liquid 2 W/(m·K)
\(x_1\) Mole fraction of liquid 1 -
\(M_1\) Molar mass of 1 kg/kmol
\(M_2\) Molar mass of 2 kg/kmol
\(\rho_1\) Molar density of 1 (kmol/m³) -
\(\rho_2\) Molar density of 2 (kmol/m³) -
\(w_1\) Mass fraction of 1 -
\(\phi_1\) Volume fraction of 1 -
\(k_{Filippov}\) Mixture conductivity, Filippov W/(m·K)
\(k_{Li}\) Mixture conductivity, Li W/(m·K)
\(k_{linear}\) Mass-fraction average (for comparison) W/(m·K)

Method and standards

Filippov and Li correlations.

Where it is used

  • Solvent blends and process streams.

Common mistakes

  • Using mole fractions in Filippov.
  • Pure conductivities at another temperature.

Assumptions and limits

  • Binary; pure values at the mixture temperature.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 2
  • Eqs. (2-113) (Filippov) and (2-114) (Li) with the diethyl ether–methanol example

Questions and answers

What does Perry's example give?

30.2 mol % diethyl ether in methanol at 0 °C: 0.160 W/(m·K) by Filippov, 0.167 by Li, 0.173 measured.

Why is the mixture below the linear average?

Unlike molecules pack and interact less effectively for energy transfer; both methods reflect this.

More than two components?

Li's method extends to many components with the same pairwise harmonic mean; this calculator handles two.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.