FireCADCalc

Liquid Thermal Conductivity by Baroncini

Thermal conductivity of a liquid of a known family (alcohols, acids, ketones, esters, ethers, hydrocarbons) from boiling point, T_c and molar mass.

Refinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: p-Cresol 400 K, alcohol (Perry's example: 0.142)Ethyl acetate 300 K, esterAcetone 300 K, ketone

Results

Perry's: about 10 % within the listed families. Estimate for design; use measured data where they exist.

Thermal conductivity0.14857W/(m·K)
Reduced temperature0.57328

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: p-Cresol 400 K, alcohol (Perry's example: 0.142). The inputs, in the units selected above:

InputValue
Temperature126.85 °C
Normal boiling point201.98 °C
Critical temperature431.50 °C
Molar mass108.14 kg/kmol
Chemical familyAlcohols

Applying the formula below gives:

ResultValue
Thermal conductivity0.14203 W/(m·K)
Reduced temperature0.56766

Open this example in the calculator and change any input.

Formula

\(k = \frac{A\,T_b^{\alpha}M^{-\beta}T_c^{-\gamma}(1 - T_r)^{0.38}}{T_r^{1/6}}\ \ \mathrm{W/(m\,K)}\)

Variables

Symbol Meaning SI unit
\(T\) Temperature K
\(T_b\) Normal boiling point K
\(T_c\) Critical temperature K
\(M\) Molar mass kg/kmol
\(\text{family}\) Chemical family -
\(k\) Thermal conductivity W/(m·K)
\(T_r\) Reduced temperature -

Method and standards

Baroncini correlation, Perry's Chemical Engineers' Handbook, 9th ed., Eq. 2-110 with the family constants of Table 2-176 (p. 2-357); Perry gives about 10 % uncertainty.

Where it is used

  • Solvent and refrigerant heat transfer.

Common mistakes

  • Choosing the wrong family.
  • Using above the normal boiling point at low pressure.

Assumptions and limits

  • Families listed only.
  • A note appears outside a reduced temperature of about 0.3–0.8. Perry gives no range; this is FireCAD's caution for a correlation fitted to ordinary liquids.

References

  • Perry's Chemical Engineers' Handbook
  • 9th ed. (McGraw-Hill, 2019)
  • sec. 2
  • Eq. (2-110) and Table 2-176 (Baroncini, DiFilippo, Latini and Pacetti, 1981) with the p-cresol example

Questions and answers

What does Perry's example give?

p-Cresol at 400 K (alcohol family): 0.142 W/(m·K), 7.6 % above DIPPR.

Which family for a compound with several groups?

The one that governs its behaviour; if unclear, compare with Missenard.

Does it work for water?

No; use IAPWS for water.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.