Worked example
Example: p-Cresol 400 K, alcohol (Perry's example: 0.142). The inputs, in the units selected above:
| Input | Value |
|---|---|
| Temperature | 126.85 °C |
| Normal boiling point | 201.98 °C |
| Critical temperature | 431.50 °C |
| Molar mass | 108.14 kg/kmol |
| Chemical family | Alcohols |
Applying the formula below gives:
| Result | Value |
|---|---|
| Thermal conductivity | 0.14203 W/(m·K) |
| Reduced temperature | 0.56766 |
Open this example in the calculator and change any input.
Formula
\(k = \frac{A\,T_b^{\alpha}M^{-\beta}T_c^{-\gamma}(1 - T_r)^{0.38}}{T_r^{1/6}}\ \ \mathrm{W/(m\,K)}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(T\) | Temperature | K |
| \(T_b\) | Normal boiling point | K |
| \(T_c\) | Critical temperature | K |
| \(M\) | Molar mass | kg/kmol |
| \(\text{family}\) | Chemical family | - |
| \(k\) | Thermal conductivity | W/(m·K) |
| \(T_r\) | Reduced temperature | - |
Method and standards
Baroncini correlation, Perry's Chemical Engineers' Handbook, 9th ed., Eq. 2-110 with the family constants of Table 2-176 (p. 2-357); Perry gives about 10 % uncertainty.
Where it is used
- Solvent and refrigerant heat transfer.
Common mistakes
- Choosing the wrong family.
- Using above the normal boiling point at low pressure.
Assumptions and limits
- Families listed only.
- A note appears outside a reduced temperature of about 0.3–0.8. Perry gives no range; this is FireCAD's caution for a correlation fitted to ordinary liquids.
References
- Perry's Chemical Engineers' Handbook
- 9th ed. (McGraw-Hill, 2019)
- sec. 2
- Eq. (2-110) and Table 2-176 (Baroncini, DiFilippo, Latini and Pacetti, 1981) with the p-cresol example
Questions and answers
What does Perry's example give?
p-Cresol at 400 K (alcohol family): 0.142 W/(m·K), 7.6 % above DIPPR.
Which family for a compound with several groups?
The one that governs its behaviour; if unclear, compare with Missenard.
Does it work for water?
No; use IAPWS for water.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.