Worked example
Example: 10 % NaCl brine, 1 t water. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Strength entered as | % NaCl by mass |
| Strength | 10.000 - |
| Water | 1,000.0 kg |
Applying the formula below gives:
| Result | Value |
|---|---|
| Salt by mass | 10.000 % |
| Salometer degrees | 37.879 |
| Salt to dissolve in the water | 111.11 kg |
Open this example in the calculator and change any input.
Formula
\(x = 0.264\cdot\frac{°SAL}{100}, \quad M_s = M_w\frac{x}{1 - x}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{basis}\) | Strength entered as | - |
| \(s\) | Strength | - |
| \(M_w\) | Water | kg |
| \(x\) | Salt by mass | - |
| \(°SAL\) | Salometer degrees | - |
| \(M_s\) | Salt to dissolve in the water | kg |
Method and standards
Salometer definition and mass balance.
Where it is used
- Pickling, cheese brining and refrigeration brines.
Common mistakes
- Adding salt as a % of the final brine instead of the water.
- Using % w/v.
Assumptions and limits
- NaCl brine near room temperature; strengths above saturation (26.4 %, 100 °SAL) are rejected.
References
- Definitions and mass and energy balances: salometer scale with 100 °SAL = saturated brine (26.4 % NaCl at about 15.6 °C)
Questions and answers
What is a salometer degree?
1 % of saturation: 100 °SAL is saturated brine at 26.4 % NaCl.
How much salt for a 10 % brine?
About 111 g per litre of water (10/90 of the water mass).
Is it linear?
The salometer scale is defined linearly in % saturation.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.