FireCADCalc

Cost of Steam with Three Fuels

Fuel cost per tonne of steam for up to three fuels from the steam and feedwater enthalpies (IF97), each fuel's price, calorific value and boiler efficiency.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationDistillery and ethanolIAPWS-IF97 (water and steam)Boiler

Inputs

Examples: Bagasse, coal, huskSuperheated 46 bar

Results

Fuel only: add power, water, chemicals, labour and maintenance for the full cost of steam.

Heat per kg of steam2,447.4kJ/kg
Fuel cost per tonne of steam, fuel 1655.57
Fuel cost per tonne of steam, fuel 21,167.9
Fuel cost per tonne of steam, fuel 31,087.8

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Bagasse, coal, husk. The inputs, in the units selected above:

InputValue
Steam pressure (absolute)11.000 bar
Steam conditionSuperheated at the temperature below
Steam temperature (superheated only)185.00 °C
Feedwater temperature80.000 °C
Fuel 1 price per tonne1,800.0 -
Fuel 1 GCV9,600.0 kJ/kg
Efficiency on fuel 170.000 %
Fuel 2 price per tonne9,000.0 -
Fuel 2 GCV23,000 kJ/kg
Efficiency on fuel 282.000 %
Fuel 3 price per tonne4,500.0 -
Fuel 3 GCV13,500 kJ/kg
Efficiency on fuel 375.000 %

Applying the formula below gives:

ResultValue
Heat per kg of steam2,447.4 kJ/kg
Fuel cost per tonne of steam, fuel 1655.57
Fuel cost per tonne of steam, fuel 21,167.9
Fuel cost per tonne of steam, fuel 31,087.8

Open this example in the calculator and change any input.

Formula

\(C_i = \frac{h_s - h_{fw}}{GCV_i \eta_i} c_i\)

Variables

Symbol Meaning SI unit
\(p\) Steam pressure (absolute) Pa
\(T\) Steam temperature (superheated only) K
\(\text{state}\) Steam condition: dry saturated or superheated -
\(T_{fw}\) Feedwater temperature K
\(c_1\) Fuel 1 price per tonne -
\(GCV_1\) Fuel 1 GCV J/kg
\(\eta_1\) Efficiency on fuel 1 -
\(c_2\) Fuel 2 price per tonne -
\(GCV_2\) Fuel 2 GCV J/kg
\(\eta_2\) Efficiency on fuel 2 -
\(c_3\) Fuel 3 price per tonne -
\(GCV_3\) Fuel 3 GCV J/kg
\(\eta_3\) Efficiency on fuel 3 -
\(\Delta h\) Heat per kg of steam J/kg
\(C_1\) Fuel cost per tonne of steam, fuel 1 -
\(C_2\) Fuel cost per tonne of steam, fuel 2 -
\(C_3\) Fuel cost per tonne of steam, fuel 3 -

Method and standards

Energy balance: fuel per tonne of steam is the heat added from feedwater to steam (IAPWS-IF97) over each fuel's GCV and efficiency, times its price.

Where it is used

  • Fuel purchase decisions.
  • Off-season fuel planning.

Common mistakes

  • Mixing gross and net bases.

Assumptions and limits

  • Fuel cost only.
  • Steam dry saturated or superheated as chosen.
  • Feedwater must be liquid at the steam pressure.

References

  • Fuel per tonne of steam = Δh/(GCV η); Δh from IAPWS-IF97

Questions and answers

Why include efficiency for each fuel?

Wet biomass burns at lower efficiency, which raises its cost per tonne of steam.

Delivered price?

Use the price at the boiler, including transport and handling.

Currency?

Any, consistently.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.