FireCADCalc

Sugar–Distillery Complex: Bagasse and Steam per Tonne of Cane

Per tonne of cane: bagasse for the sugar house, ethanol from its molasses, steam and bagasse for the distillery, and the surplus bagasse left.

Sugar mill and cogenerationDistillery and ethanol

Inputs

Examples: Typical complexSteam-hungry mill

Results

The distillery runs on stored molasses beyond the season: its steam per tonne of cane is spread over the year.

Bagasse for the sugar house % cane20.455%
Ethanol per tonne of cane10.350L/t
Distillery steam % cane5.1750%
Bagasse for the distillery % cane2.3523%
Surplus bagasse % cane (negative = deficit)6.1932%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Typical complex. The inputs, in the units selected above:

InputValue
Bagasse % cane29.000 %
Sugar-house boiler steam % cane45.000 %
Steam-to-bagasse ratio2.2000 kg/kg
Molasses % cane4.5000 %
Ethanol per tonne of molasses230.00 L/t
Distillery steam per litre (incl. MEE)5.0000 kg/L

Applying the formula below gives:

ResultValue
Bagasse for the sugar house % cane20.455 %
Ethanol per tonne of cane10.350 L/t
Distillery steam % cane5.1750 %
Bagasse for the distillery % cane2.3523 %
Surplus bagasse % cane (negative = deficit)6.1932 %

Open this example in the calculator and change any input.

Formula

\(B_s = \frac{s_b}{r}, \quad y_c = FM\,y_M, \quad s_{d,c} = y_c s_d, \quad B_d = \frac{s_{d,c}}{r}, \quad B_x = B - B_s - B_d\)

Variables

Symbol Meaning SI unit
\(B\) Bagasse % cane -
\(s_b\) Sugar-house boiler steam % cane -
\(r\) Steam-to-bagasse ratio kg/kg
\(FM\) Molasses % cane -
\(y_M\) Ethanol per tonne of molasses m³/kg
\(s_d\) Distillery steam per litre (incl. MEE) kg/m³
\(B_s\) Bagasse for the sugar house % cane -
\(y_c\) Ethanol per tonne of cane m³/kg
\(s_{d,c}\) Distillery steam % cane -
\(B_d\) Bagasse for the distillery % cane -
\(B_x\) Surplus bagasse % cane (negative = deficit) -

Method and standards

Mass and steam balance per tonne of cane: the bagasse each plant burns is its steam divided by the steam-to-bagasse ratio, and the surplus is what is left of the bagasse made. The defaults (29 % bagasse, 45 % steam, ratio 2.2, 230 L/t of molasses, 5 kg of steam per litre) are FireCAD illustrative values for an Indian complex, not sourced design data: enter your plant's figures.

Where it is used

  • Integrated complex planning.
  • Bagasse allocation.

Common mistakes

  • Season and annual figures mixed.

Assumptions and limits

  • Per tonne of cane.
  • One steam-to-bagasse ratio for both boilers: they are assumed alike in steam conditions, efficiency and bagasse moisture. Use a weighted ratio if they differ.
  • A negative surplus is a deficit to be made up with other fuel; a warning is shown.

References

  • Mass and steam balance per tonne of cane

Questions and answers

Can bagasse fire the distillery too?

Often, if the sugar house is steam-efficient; otherwise slop firing or coal fills the gap.

Why per tonne of cane?

It ties both plants to the one raw material and compares complexes of any size.

ZLD steam?

Include spent wash evaporation in the distillery's steam per litre.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.