FireCADCalc

Pulverised Coal Fineness (Rosin–Rammler)

Rosin–Rammler size distribution of pulverised coal from two sieve results (such as 200 and 50 mesh), and the share passing any other sieve size.

Thermal power plantChemical and fertiliserPulp and paperBoilerBurner and furnace

Inputs

Examples: 70 % through 75 µm, 98.5 % through 300 µm; at 150 µm75 %, 99 %; at 106 µmCoarse: 60 %, 96 %; at 212 µm

Results

Share passing the sieve wanted90.462%
Uniformity (spread) index0.90634
Characteristic size (36.8 % retained)82.595µm

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 70 % through 75 µm, 98.5 % through 300 µm; at 150 µm. The inputs, in the units selected above:

InputValue
First sieve aperture75.000 µm
Share passing the first sieve70.000 %
Second sieve aperture300.00 µm
Share passing the second sieve98.500 %
Sieve aperture wanted150.00 µm

Applying the formula below gives:

ResultValue
Share passing the sieve wanted89.446 %
Uniformity (spread) index0.90124
Characteristic size (36.8 % retained)61.039 µm

Open this example in the calculator and change any input.

Formula

\(R(d) = \exp\left[-\left(\frac{d}{d'}\right)^n\right] \qquad P = 1 - R \qquad n = \frac{\ln(-\ln R_2) - \ln(-\ln R_1)}{\ln d_2 - \ln d_1}\)

\(d' = \exp\left[\ln d_1 - \frac{\ln(-\ln R_1)}{n}\right], \quad P_3 = 1 - \exp\left[-\left(\frac{d_3}{d'}\right)^n\right]\)

Variables

Symbol Meaning SI unit
\(d_1\) first sieve aperture m
\(P_1\) share passing the first sieve –
\(d_2\) second sieve aperture m
\(P_2\) share passing the second sieve –
\(d_3\) sieve wanted m
\(P_3\) share passing the sieve wanted –
\(n\) uniformity index –
\(d'\) characteristic size m
\(R\) share retained, 1 − P –
\(d\) particle size m
\(P\) share passing –

Method and standards

Rosin–Rammler distribution fitted through two sieve points.

Where it is used

  • Mill performance tests and classifier setting.
  • Linking fineness to unburned carbon.
  • Comparing mills and coals.

Common mistakes

  • Using retained instead of passing shares.
  • Sampling coal unevenly from PF pipes.
  • Extrapolating far outside the two sieves.

Assumptions and limits

  • Rosin–Rammler fits typical PF; the fit passes exactly through the two points.
  • A sieve outside the two measured ones is extrapolated; a warning appears.

References

  • Rosin and Rammler (1933)
  • The laws governing the fineness of powdered coal
  • Journal of the Institute of Fuel 7

Questions and answers

How fine is my pulverised coal?

With 70 % through 75 µm (200 mesh) and 98.5 % through 300 µm (50 mesh), the Rosin–Rammler fit has n = 0.90 and d' = 61 µm, so 89.5 % passes 150 µm.

Why does the 50-mesh figure matter so much?

Coarse particles burn slowly and leave unburned carbon in the fly ash; a few per cent more on 50 mesh raises the carbon loss noticeably.

What is n?

The spread of the distribution: a higher n means more uniform sizes; classifier settings change it.

Method and article reviewed by FireCAD engineering on 11 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.