Worked example
Example: 1 000 L of 96 % to 40 %. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Spirit volume at 20 °C | 1,000.0 L |
| Spirit strength | 96.000 % |
| Bottling strength | 40.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Water to add | 1,467.9 kg |
| Water to add at 20 °C | 1,470.5 L |
| Final volume at 20 °C | 2,400.0 L |
| Water by the naive volume rule | 1,400.0 L |
Open this example in the calculator and change any input.
Formula
\(p_2 m_2 = p_1 m_1, \quad m_w = m_2 - m_1, \quad V_2 = \frac{m_2}{\rho_{20}(p_2)}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(V_1\) | Spirit volume at 20 °C | m³ |
| \(q_1\) | Spirit strength | - |
| \(q_2\) | Bottling strength | - |
| \(m_w\) | Water to add | kg |
| \(V_w\) | Water to add at 20 °C | m³ |
| \(V_2\) | Final volume at 20 °C | m³ |
| \(V_1(q_1/q_2 - 1)\) | Water by the naive volume rule | m³ |
Method and standards
Mass balance with R 22 densities.
Where it is used
- Bottling hall reduction.
- Blending vodka, whisky, rum and gin.
Common mistakes
- Using the naive volume rule.
- Ignoring temperature.
Assumptions and limits
- Volumes at 20 °C; pure water.
References
- OIML R 22 (1973)
- Alcoholometry
- and International Alcoholometric Tables (1975): formula of Wagenbreth and Blanke
- pp. 12–13
Questions and answers
Why is the naive rule wrong?
It ignores contraction: more water is needed than V1(q1/q2 − 1) to reach the strength.
What water should be used?
Demineralised water, to avoid haze.
Why measure again at 20 °C?
Mixing releases heat, and strength by volume is defined at 20 °C.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.