FireCADCalc

Pycnometer Density and Alcoholic Strength

Density of a spirit from pycnometer weighings (empty, with water, with sample) corrected for air buoyancy, and its alcoholic strength by the OIML R 22 formula.

Distillery and ethanol

Inputs

Examples: 50 mL pycnometer at 20 °CAt 25 °C, strong spirit

0 to 40 °C: the water reference of the R 22 formula is used from 0 °C (the formula itself covers −20 to +40 °C for spirits).

Results

Water density at t (R 22)997.04kg/m³
Sample density at t820.25kg/m³
Strength by mass87.440%
Strength by volume at 20 °C91.359%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 50 mL pycnometer at 20 °C. The inputs, in the units selected above:

InputValue
Empty pycnometer (weighed in air)30.000 g
Filled with water79.900 g
Filled with sample76.300 g
Temperature of the liquid20.000 °C
Air density1.2000 kg/m³

Applying the formula below gives:

ResultValue
Water density at t (R 22)998.20 kg/m³
Sample density at t926.27 kg/m³
Strength by mass44.258 %
Strength by volume at 20 °C51.942 %

Open this example in the calculator and change any input.

Formula

\(\rho_s = \frac{m_s - m_0}{m_w - m_0}(\rho_w - \rho_a) + \rho_a, \quad \rho(p, t) = \rho_s\)

Variables

Symbol Meaning SI unit
\(m_0\) Empty pycnometer (weighed in air) kg
\(m_w\) Filled with water kg
\(m_s\) Filled with sample kg
\(t\) Temperature of the liquid K
\(\rho_a\) Air density kg/m³
\(\rho_w\) Water density at t (R 22) kg/m³
\(\rho_s\) Sample density at t kg/m³
\(p\) Strength by mass -
\(q\) Strength by volume at 20 °C -

Method and standards

Pycnometer method with R 22 water density and strength inversion.

Where it is used

  • Reference laboratory strength determination.
  • Calibrating density meters.

Common mistakes

  • Weighing at different temperatures.
  • Air bubbles in the pycnometer.

Assumptions and limits

  • Same temperature for water and sample; 0 to 40 °C.

References

  • OIML R 22 (1973)
  • Alcoholometry
  • and International Alcoholometric Tables (1975)
  • §5 (pycnometers) and the R 22 formula for water at p = 0
  • Pycnometer buoyancy correction: ρs = (ms − m0)/(mw − m0)(ρw − ρa) + ρa

Questions and answers

Why the air term?

Each weighing is reduced by the air displaced; the correction is about 0.1 % of density.

Why water at the same temperature?

It calibrates the pycnometer volume at that temperature.

Does it work for wines?

Only after distillation: extract raises the density.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.