FireCADCalc

Pure Ethanol in a Weighed Mass of Spirit (Air Buoyancy)

Pure ethanol at 20 °C in a mass of spirit weighed in air of 1.2 kg/m³ with conventional weights, correcting for buoyancy, OIML R 22 Tables XII.

Distillery and ethanol

Inputs

Examples: 20 t of 96 % vol at 25 °C100 kg of 50 % mass at 20 °C

R 22 formula range −20 to +40 °C.

Results

Density at t803.08kg/m³
True mass of spirit20,027kg
Mass of ethanol18,793kg
Pure ethanol at 20 °C23,811L

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 20 t of 96 % vol at 25 °C. The inputs, in the units selected above:

InputValue
Mass weighed in air (conventional)20,000 kg
Strength entered as% vol (by volume at 20 °C)
Alcoholic strength96.000 %
Temperature of the liquid25.000 °C

Applying the formula below gives:

ResultValue
Density at t803.08 kg/m³
True mass of spirit20,027 kg
Mass of ethanol18,793 kg
Pure ethanol at 20 °C23,811 L

Open this example in the calculator and change any input.

Formula

\(v = \frac{p\,m}{\rho_{20}(1)}\left[1 - 1.2\left(\frac{1}{8000} - \frac{1}{\rho_t}\right)\right]\)

Variables

Symbol Meaning SI unit
\(m\) Mass weighed in air (conventional) kg
\(\text{basis}\) Strength entered as -
\(s\) Alcoholic strength -
\(t\) Temperature of the liquid K
\(\rho_t\) Density at t kg/m³
\(m_t\) True mass of spirit kg
\(m_e\) Mass of ethanol kg
\(v\) Pure ethanol at 20 °C m³
\(1.2, 8000\) Air and conventional weight densities kg/m³

Method and standards

R 22 Annex I formula for Tables XII.

Where it is used

  • Road-tanker weighbridge gauging.
  • Excise by weight.

Common mistakes

  • Treating the balance reading as true mass.
  • Using % vol in a mass balance.

Assumptions and limits

  • Air 1.2 kg/m³; conventional weights.

References

  • OIML R 22 (1973)
  • Alcoholometry
  • and International Alcoholometric Tables (1975)
  • Annex I
  • Tables XIIa and XIIb
  • OIML R 33
  • conventional value of the result of weighing in air (weights of 8 000 kg/m³)

Questions and answers

Why correct for air?

The spirit displaces about 1.2 kg of air per m³ and the steel weights much less, so the balance under-reads by about 0.1 %.

Where does 8 000 come from?

Conventional weighing assumes weights of density 8 000 kg/m³ in air of 1.2 kg/m³ (OIML R 33).

Why does temperature matter?

Only through the density at t in the buoyancy term.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.