FireCADCalc

Bulk Litres and Absolute Litres of Alcohol

Absolute litres of alcohol from bulk litres and strength (% v/v at 20 °C), or the bulk litres that hold a quantity of absolute alcohol.

Distillery and ethanol

Inputs

Examples: 100 BL rectified spiritCountry liquor blend

Results

Absolute litres in the bulk94.400L
Bulk litres holding the required absolute litres1.0593L

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 BL rectified spirit. The inputs, in the units selected above:

InputValue
Bulk litres at 20 °C100.00 L
Strength (% v/v at 20 °C)94.400 %
Absolute litres required1.0000 L

Applying the formula below gives:

ResultValue
Absolute litres in the bulk94.400 L
Bulk litres holding the required absolute litres1.0593 L

Open this example in the calculator and change any input.

Formula

\(AL = BL \cdot s, \quad BL_r = \frac{AL_t}{s}\)

Variables

Symbol Meaning SI unit
\(BL\) Bulk litres at 20 °C m³
\(s\) Strength (% v/v at 20 °C) -
\(AL_t\) Absolute litres required m³
\(AL\) Absolute litres in the bulk m³
\(BL_r\) Bulk litres holding the required absolute litres m³

Method and standards

Definitions.

Where it is used

  • Excise and stock accounting.
  • Dispatch planning.

Common mistakes

  • Apparent strength used without temperature correction.

Assumptions and limits

  • Strength and bulk volume both at 20 °C. A tank volume at another temperature must be corrected first (strong spirit expands about 0.1 % per °C): see the OIML steel-tank volume calculator.

References

  • Definition: AL = BL × alcoholic strength by volume (OIML R 22, 20 °C)

Questions and answers

What is an absolute litre?

A litre of pure ethanol at 20 °C contained in the spirit.

Why 20 °C?

Strength by volume is defined at 20 °C; correct apparent strength first.

Rectified spirit?

About 94–95 % v/v; anhydrous ethanol is 99.5 % or more.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.