FireCADCalc

Alcohol Strength: % v/v, % w/w, g/L and US Proof

Converts alcoholic strength by volume to strength by mass, ethanol content in g/L and US proof, using the mixture density measured at the same temperature.

Distillery and ethanol

Inputs

Examples: Rectified spirit 94.4 %40 % v/v spirit

Measured, or from alcoholometric tables.

Results

Ethanol and water contract on mixing, so % w/w needs the measured mixture density, not a blend of pure densities.

Strength by mass (% w/w)91.981%
Ethanol content745.04g/L
US proof188.80

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Rectified spirit 94.4 %. The inputs, in the units selected above:

InputValue
Strength by volume (% v/v)94.400 %
Density of the mixture at 20 °C810.00 kg/m³
Ethanol density at 20 °C789.24 kg/m³

Applying the formula below gives:

ResultValue
Strength by mass (% w/w)91.981 %
Ethanol content745.04 g/L
US proof188.80

Open this example in the calculator and change any input.

Formula

\(c = s_v \rho_e, \quad s_w = \frac{s_v \rho_e}{\rho_m}, \quad \text{proof}_{US} = 200\,s_v\)

Variables

Symbol Meaning SI unit
\(s_v\) Strength by volume (% v/v) -
\(\rho_m\) Density of the mixture at 20 °C kg/m³
\(\rho_e\) Ethanol density at 20 °C kg/m³
\(s_w\) Strength by mass (% w/w) -
\(c\) Ethanol content kg/m³
\(\text{proof}\) US proof -

Method and standards

Definitions of strength by mass and ethanol content from the strength by volume and the densities at 20 °C. A note compares the density entered with the OIML R 22 density of a pure ethanol–water mixture of the same strength.

Where it is used

  • Lab conversions.
  • Molecular sieve and blending balances on mass.

Common mistakes

  • Mixture density at a different temperature.

Assumptions and limits

  • All at 20 °C.
  • US proof is 2 × % v/v; the US definition refers to 60 °F, so a TTB-table proof differs slightly from this 20 °C figure.
  • A density more than 0.5 % from the R 22 value for the strength gives a note.

References

  • Definitions: s_w = s_v ρ_e/ρ_m; US proof = 2 × % v/v (OIML R 22 density basis)

Questions and answers

Why is % w/w lower than % v/v?

Ethanol is lighter than water, so it is a smaller share by mass.

Where does the mixture density come from?

A density meter or the alcoholometric tables at 20 °C.

UK proof?

The old UK proof is not a simple multiple; this calculator gives US proof only.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.