FireCADCalc

Projectile Motion: Range, Maximum Height and Time of Flight

Range, maximum height, time of flight and impact velocity of a projectile launched at a speed and angle from a height, without air resistance.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: 20 m/s at 45° from groundHorizontal 10 m/s from 5 m

Results

No air drag; real ranges are shorter, much shorter for light or fast objects.

Time of flight2.8842s
Horizontal range40.789m
Maximum height above launch10.197m
Impact speed20.000m/s
Impact angle below horizontal45.000°

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 20 m/s at 45° from ground. The inputs, in the units selected above:

InputValue
Launch speed20.000 m/s
Launch angle above horizontal45.000 °
Launch height above landing level0 m

Applying the formula below gives:

ResultValue
Time of flight2.8842 s
Horizontal range40.789 m
Maximum height above launch10.197 m
Impact speed20.000 m/s
Impact angle below horizontal45.000 °

Open this example in the calculator and change any input.

Formula

\(t_f = \frac{v_0\sin\theta + \sqrt{v_0^2\sin^2\theta + 2gh_0}}{g}, \quad R = v_0\cos\theta\,t_f, \quad h_{max} = \frac{v_0^2\sin^2\theta}{2g}\)

Variables

Symbol Meaning SI unit
\(v_0\) Launch speed m/s
\(\theta\) Launch angle above horizontal rad
\(h_0\) Launch height above landing level m
\(t_f\) Time of flight s
\(R\) Horizontal range m
\(h_{max}\) Maximum height above launch m
\(v_i\) Impact speed m/s
\(\theta_i\) Impact angle below horizontal rad

Method and standards

Kinematics under constant gravity.

Where it is used

  • Discharge of material from conveyors and chutes.
  • Teaching and quick checks.

Common mistakes

  • Ignoring drag for long ranges.
  • Angle in degrees in a radian formula.

Assumptions and limits

  • Flat earth; no drag.

References

  • Meriam and Kraige
  • Engineering Mechanics: Dynamics
  • 8th ed. (Wiley, 2015)
  • ch. 2 (projectile motion)

Questions and answers

Which angle gives the longest range?

45° when launching and landing at the same level, without drag.

Why is the impact speed equal to launch speed on level ground?

Without drag, mechanical energy is conserved.

What do the defaults represent?

A launch at 20 m/s and 45° from ground level.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.