FireCADCalc

Centre of Gravity of a Composite Body

Total mass and centre of gravity (x, y, z) of an assembly of up to five parts from each part's mass and centre-of-gravity coordinates.

Thermal power plantProcess steam and utilitiesSugar mill and cogenerationChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: Skid: motor, pump, panelFive parts

Results

Choose one origin for all parts. For lifting, the hook must be directly above this point or the load will tilt.

Total mass2,400.0kg
Centre of gravity x1.4500m
Centre of gravity y0.81667m
Centre of gravity z0.033333m

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Skid: motor, pump, panel. The inputs, in the units selected above:

InputValue
Mass 11,200.0 kg
x of 10.50000 m
y of 10.80000 m
z of 10 m
Mass 2800.00 kg
x of 22.0000 m
y of 20.50000 m
z of 20 m
Mass 3400.00 kg
x of 33.2000 m
y of 31.5000 m
z of 30.20000 m
Mass 40 kg
x of 40 m
y of 40 m
z of 40 m
Mass 50 kg
x of 50 m
y of 50 m
z of 50 m

Applying the formula below gives:

ResultValue
Total mass2,400.0 kg
Centre of gravity x1.4500 m
Centre of gravity y0.81667 m
Centre of gravity z0.033333 m

Open this example in the calculator and change any input.

Formula

\(\bar x = \frac{\sum m_ix_i}{\sum m_i}, \quad \bar y = \frac{\sum m_iy_i}{\sum m_i}, \quad \bar z = \frac{\sum m_iz_i}{\sum m_i}\)

Variables

Symbol Meaning SI unit
\(m_1\) Mass 1 kg
\(x_1\) x of 1 m
\(y_1\) y of 1 m
\(z_1\) z of 1 m
\(m_2\) Mass 2 kg
\(x_2\) x of 2 m
\(y_2\) y of 2 m
\(z_2\) z of 2 m
\(m_3\) Mass 3 kg
\(x_3\) x of 3 m
\(y_3\) y of 3 m
\(z_3\) z of 3 m
\(m_4\) Mass 4 kg
\(x_4\) x of 4 m
\(y_4\) y of 4 m
\(z_4\) z of 4 m
\(m_5\) Mass 5 kg
\(x_5\) x of 5 m
\(y_5\) y of 5 m
\(z_5\) z of 5 m
\(M\) Total mass kg
\(\bar x\) Centre of gravity x m
\(\bar y\) Centre of gravity y m
\(\bar z\) Centre of gravity z m

Method and standards

First moments of mass.

Where it is used

  • Skid and module lifting.
  • Vehicle and trailer loading.

Common mistakes

  • Different origins for parts.
  • Forgetting fluids in tanks.

Assumptions and limits

  • Point masses at part CGs.

References

  • Moment of mass about axes (statics definitions)

Questions and answers

Why does CG matter in lifting?

A load hangs with its CG under the hook; slings must be arranged around it or legs carry unequal loads.

Can masses be negative?

Not here: subtract a hole by giving its mass as a separate removed part only in your own spreadsheet.

What do the defaults represent?

A skid with a 1.2 t motor, 0.8 t pump and 0.4 t panel.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.