Worked example
Example: 5 t, two legs at 60°. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Load mass | 5,000.0 kg |
| Legs sharing the load | 2 (also a three-leg sling, counted as 2 for safety) |
| Leg angle from horizontal | 60.000 ° |
Applying the formula below gives:
| Result | Value |
|---|---|
| Angle factor | 1.1547 |
| Tension per leg | 28.309 kN |
| Least rated working load limit per leg (leg tension as mass) | 2,886.8 kg |
Open this example in the calculator and change any input.
Formula
\(T = \frac{Wg}{n\sin\theta}, \quad WLL = \frac{T}{g}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(W\) | Load mass | kg |
| \(n\) | Legs sharing the load | - |
| \(\theta\) | Leg angle from horizontal | rad |
| \(1/\sin\theta\) | Angle factor | - |
| \(T\) | Tension per leg | N |
| \(WLL\) | Least rated working load limit per leg (leg tension as mass) | kg |
| \(g\) | Standard gravity, 9.806 65 | m/s² |
Method and standards
Equilibrium of forces.
Where it is used
- Rigging plans.
- Choosing sling size.
Common mistakes
- Measuring the angle from vertical instead of horizontal.
- Counting all four legs.
Assumptions and limits
- Symmetrical lift; centre of gravity below the hook.
- WLL is the leg tension as a mass with no extra design factor: a sling's rated WLL already includes the maker's safety factor, so pick one rated at least this; dynamic allowances are extra.
References
- Statics of a symmetrical sling (definitions)
Questions and answers
Why do flat slings carry more?
Each leg must hold the vertical share of the load; as the angle flattens, the horizontal pull rises. At 30° each leg carries the full load.
Why count fewer legs?
Unequal leg lengths mean one or two legs may carry most of the load.
What do the defaults represent?
A 5 t load on a two-leg sling at 60° from horizontal.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.