Worked example
Example: Porter 5 kg balls, 25 kg sleeve, 150–180 mm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Governor type | Porter (equal arms) |
| Speed (Watt height) | 75.000 rpm |
| Mass of each ball | 5.0000 kg |
| Central (sleeve) load | 25.000 kg |
| Lower height | 0.15000 m |
| Upper height | 0.18000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Speed at h₁ | 189.13 rpm |
| Speed at h₂ | 172.65 rpm |
| Speed range | 16.479 rpm |
Open this example in the calculator and change any input.
Formula
\(h_W = \frac{g}{\omega^2}, \quad N^2 = \frac{m + M}{m}\frac{g}{4\pi^2h}\ \text{(Porter)}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\text{type}\) | Governor type | - |
| \(N\) | Speed (Watt height) | 1/s |
| \(m\) | Mass of each ball | kg |
| \(M\) | Central (sleeve) load | kg |
| \(h_1\) | Lower height | m |
| \(h_2\) | Upper height | m |
| \(h_W\) | Watt governor height at N | m |
| \(N_1\) | Speed at h₁ | 1/s |
| \(N_2\) | Speed at h₂ | 1/s |
| \(N_1 - N_2\) | Speed range | 1/s |
Method and standards
Governor equilibrium.
Where it is used
- Older steam engines and turbines.
- Teaching mechanisms.
Common mistakes
- Unequal arms with the equal-arm formula.
- Ignoring friction at the sleeve.
Assumptions and limits
- Frictionless; equal arms; h₁ below h₂.
- The Watt height at N is shown for the Watt type only.
References
- Rattan
- Theory of Machines
- 4th ed. (McGraw-Hill, 2014); Bhandari
- Design of Machine Elements
- 4th ed. (McGraw-Hill, 2017) (Watt and Porter governors)
Questions and answers
Why does a Porter governor run faster than a Watt?
The heavy central load adds to the gravity term, so the balls must spin faster at the same height; it is also more powerful.
Why is the Watt governor limited to slow speeds?
Its height falls with the square of speed; at a few hundred rpm it becomes too small to act.
What do the defaults represent?
A Porter governor with 5 kg balls and a 25 kg sleeve working between 150 and 180 mm height.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.