Worked example
Example: 10 kN on four falls, 96 % sheaves. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Load | 10.000 kN |
| Rope falls supporting the load (velocity ratio) | 4.0000 - |
| Efficiency per sheave | 96.000 % |
| Hauling line | Pulled straight off the last moving sheave |
Applying the formula below gives:
| Result | Value |
|---|---|
| Efficiency of the block | 94.158 % |
| Mechanical advantage η n | 3.7663 |
| Effort W/MA | 2.6551 kN |
| Ideal effort W/n | 2.5000 kN |
Open this example in the calculator and change any input.
Formula
\(VR = n, \quad \eta = \frac{1 - \eta_s^n}{n (1 - \eta_s)}\ \ (\times\,\eta_s \text{ with a lead sheave}), \quad MA = \eta\, VR, \quad P = \frac{W}{MA}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(W\) | Load | N |
| \(n\) | Rope falls supporting the load (velocity ratio) | - |
| \(\eta_s\) | Efficiency per sheave | - |
| \(\text{lead}\) | Hauling line (straight off, or over a lead sheave) | - |
| \(\eta\) | Efficiency of the block | - |
| \(MA\) | Mechanical advantage η n | - |
| \(P\) | Effort W/MA | N |
| \(P_i\) | Ideal effort W/n | N |
Method and standards
Machine relations with sheave friction.
Where it is used
- Hoisting tackle and chain blocks.
- Mechanics examinations.
Common mistakes
- Counting the hauling part as a fall.
- Assuming 100 % efficiency.
Assumptions and limits
- Equal sheave efficiency.
- The falls carry P, P η_s, …, P η_s^(n−1). With the hauling line pulled straight off the last sheave a single fixed pulley shows 100 %; choose the lead-sheave option when the line passes over a further sheave.
References
- Textbook mechanics (machines: MA = η VR; tackle efficiency (1 − ηⁿ)/(n(1 − η)) with sheave efficiency η)
Questions and answers
10 kN on four falls with 96 % sheaves?
Block efficiency 94.2 %, effort 2655 N instead of 2500 N.
What is velocity ratio?
Effort travel ÷ load travel: the number of supporting falls.
Why does efficiency drop with more falls?
Each extra sheave adds friction.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.