Worked example
Example: 2 kg at 300 mm, 1 500 rpm. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Mass | 2.0000 kg |
| Radius of rotation | 0.30000 m |
| Speed | 1,500.0 rpm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Centrifugal force m ω² r | 14.804 kN |
| Acceleration in g | 754.81 |
| Peripheral speed | 47.124 m/s |
Open this example in the calculator and change any input.
Formula
\(F = m \omega^2 r, \quad \omega = 2\pi N, \quad v = \omega r\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(m\) | Mass | kg |
| \(r\) | Radius of rotation | m |
| \(N\) | Speed | 1/s |
| \(F\) | Centrifugal force m ω² r | N |
| \(a/g\) | Acceleration in g | - |
| \(v\) | Peripheral speed | m/s |
Method and standards
Circular motion.
Where it is used
- Unbalance and rotor design.
- Centrifuges.
Common mistakes
- rpm for rad/s.
- Diameter for radius.
Assumptions and limits
- Rigid rotation.
References
- Newton's laws for circular motion
Questions and answers
2 kg at 300 mm and 1500 rpm?
14.8 kN, 755 g.
Why does unbalance matter so much?
Force rises with speed squared.
What is the peripheral speed?
47.1 m/s.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.