Worked example
Example: 300 m, 4°, μ 0.15, 80 km/h, broad gauge. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Curve radius | 300.00 m |
| Banking angle | 4.0000 ° |
| Side friction coefficient | 0.15000 - |
| Design speed (for required banking) | 80.000 km/h |
| Rail gauge (for superelevation) | 1.6760 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Speed for no side friction | 51.635 km/h |
| Maximum speed before skidding | 92.056 km/h |
| Banking for the design speed (no friction) | 9.5285 ° |
| Rail superelevation for the design speed | 281.32 mm |
Open this example in the calculator and change any input.
Formula
\(v_0 = \sqrt{gR\tan\theta}, \quad v_{max} = \sqrt{gR\frac{\tan\theta + \mu}{1 - \mu\tan\theta}}, \quad \tan\theta_{req} = \frac{v^2}{gR}, \quad e = \frac{Gv^2}{gR}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(R\) | Curve radius | m |
| \(\theta\) | Banking angle | rad |
| \(\mu\) | Side friction coefficient | - |
| \(v\) | Design speed (for required banking) | m/s |
| \(G\) | Rail gauge (for superelevation) | m |
| \(v_0\) | Speed for no side friction | m/s |
| \(v_{max}\) | Maximum speed before skidding | m/s |
| \(\theta_{req}\) | Banking for the design speed (no friction) | rad |
| \(e\) | Rail superelevation for the design speed | m |
Method and standards
Curvilinear dynamics.
Where it is used
- Plant roads and rail sidings.
- Teaching.
Common mistakes
- Using design-code friction values as physical friction.
- Ignoring rollover for high vehicles.
Assumptions and limits
- Point mass; steady speed.
- Rail superelevation e = Gv²/(gR) is the small-angle form (G tan θ in place of G sin θ); the difference is under 0.5 % for usual cant, larger for steep angles. Whether the required angle is practicable (cant limits) is not checked.
References
- Meriam and Kraige
- Engineering Mechanics: Dynamics
- 8th ed. (Wiley, 2015)
- ch. 3 (curvilinear motion with friction)
Questions and answers
Why bank a curve?
A tilted surface supplies part of the centripetal force, reducing the side friction needed.
What is superelevation on rail?
The height of the outer rail above the inner; e = Gv²/(gR) balances a given speed.
What do the defaults represent?
A 300 m curve banked at 4° with side friction 0.15; 80 km/h design speed on broad-gauge track.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.