FireCADCalc

Pump Suction Specific Speed and NPSH Margin

Suction specific speed of a centrifugal pump from speed, flow per eye and NPSH required, with the NPSH margin and margin ratio against NPSH available.

Thermal power plantProcess steam and utilitiesRefinery and petrochemicalChemical and fertiliserHydraulic Institute (pumps)

Inputs

Examples: 2 950 rpm, 100 m³/h, NPSHr 4 m, NPSHa 6 m1 480 rpm, 500 m³/h, 3 m, 3.5 mCavitating: 2 950 rpm, 50 m³/h, 5 m, 4 m

Results

NPSH available is below NPSH required: the pump will cavitate.

Suction specific speed (rpm, m³/s, m)103.97
Suction specific speed (US units: rpm, gpm, ft)5,369.8
NPSH margin NPSH_a − NPSH_r-1.0000m
NPSH margin ratio0.80000

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 2 950 rpm, 100 m³/h, NPSHr 4 m, NPSHa 6 m. The inputs, in the units selected above:

InputValue
Speed2,950.0 rpm
Flow at best efficiency (per impeller eye)100.00 m³/h
NPSH required4.0000 m
NPSH available6.0000 m

Applying the formula below gives:

ResultValue
Suction specific speed (rpm, m³/s, m)173.83
Suction specific speed (US units: rpm, gpm, ft)8,977.5
NPSH margin NPSH_a − NPSH_r2.0000 m
NPSH margin ratio1.5000

Open this example in the calculator and change any input.

Formula

\(N_{ss} = \frac{n\sqrt{Q}}{NPSH_r^{0.75}}, \quad \text{margin} = NPSH_a - NPSH_r\)

Variables

Symbol Meaning SI unit
\(n\) Speed 1/s
\(Q\) Flow at best efficiency (per impeller eye) m³/s
\(NPSH_r\) NPSH required m
\(NPSH_a\) NPSH available m
\(N_{ss}\) Suction specific speed (rpm, m³/s, m) -
\(N_{ss,US}\) Suction specific speed (US units: rpm, gpm, ft) -
\(\Delta\) NPSH margin NPSH_a − NPSH_r m
\(NPSH_a/NPSH_r\) NPSH margin ratio -

Method and standards

Definitions.

Where it is used

  • Pump selection and suction troubleshooting.
  • Specification checks.

Common mistakes

  • Total flow for double suction.
  • Mixing unit systems.

Assumptions and limits

  • Values at best efficiency point.

References

  • Suction specific speed definition N_ss = n √Q / NPSH_r^0.75 (Hydraulic Institute terminology)

Questions and answers

What does a high N_ss mean?

A pump designed for low NPSH, often with a narrow stable operating range.

Which flow for a double-suction pump?

Half the flow: per impeller eye.

What margin is enough?

It depends on the service; many guides ask for a ratio of 1.1 to 1.5 or more.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.