FireCADCalc

Hydraulic Pump Flow and Power

Flow of a positive-displacement hydraulic pump from displacement, speed and volumetric efficiency, and the hydraulic and shaft power and torque at a pressure.

Inputs

Examples: 40 cc/rev, 1 450 rpm, 200 bar100 cc, 1 800 rpm, 280 bar8 cc gear pump, 2 900 rpm, 150 bar

Results

Actual flow20.880L/min
Hydraulic power Q Δp5.2200kW
Shaft power6.5250kW
Shaft torque21.486N·m

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 40 cc/rev, 1 450 rpm, 200 bar. The inputs, in the units selected above:

InputValue
Displacement per revolution40.000 mL
Speed1,450.0 rpm
Pressure rise200.00 bar
Volumetric efficiency95.000 %
Overall efficiency88.000 %

Applying the formula below gives:

ResultValue
Actual flow55.100 L/min
Hydraulic power Q Δp18.367 kW
Shaft power20.871 kW
Shaft torque137.45 N·m

Open this example in the calculator and change any input.

Formula

\(Q = V_g\, n\, \eta_v, \quad P_h = Q\, \Delta p, \quad P_s = \frac{P_h}{\eta_t}, \quad T = \frac{P_s}{2\pi n}\)

Variables

Symbol Meaning SI unit
\(V_g\) Displacement per revolution m³
\(n\) Speed 1/s
\(\Delta p\) Pressure rise Pa
\(\eta_v\) Volumetric efficiency -
\(\eta_t\) Overall efficiency -
\(Q\) Actual flow m³/s
\(P_h\) Hydraulic power Q Δp W
\(P_s\) Shaft power W
\(T\) Shaft torque N·m

Method and standards

Displacement and energy balance.

Where it is used

  • Sizing pumps and motors for power packs.
  • Checking a power unit.

Common mistakes

  • cc/rev as L.
  • Ignoring efficiency.

Assumptions and limits

  • Steady operation; overall efficiency not above the volumetric efficiency.

References

  • Positive-displacement pump relations Q = V_g n η_v; P = Q Δp / η

Questions and answers

40 cc/rev at 1450 rpm and 200 bar?

55.1 L/min, 18.4 kW hydraulic, 20.9 kW at the shaft.

Quick rule?

kW ≈ L/min × bar / 600 hydraulic.

Why two efficiencies?

Leakage lowers flow; friction raises torque.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.