FireCADCalc

Hydraulic Motor Torque, Speed and Power

Output torque, speed and power of a hydraulic motor from displacement, pressure drop and flow, with volumetric and mechanical efficiencies.

Inputs

Examples: 100 cc/rev, 80 L/min, 150 bar400 cc, 60 L/min, 200 bar (slow, high torque)20 cc, 40 L/min, 100 bar

Results

Output speed760.00rpm
Output torque219.63N·m
Output power17.480kW

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 cc/rev, 80 L/min, 150 bar. The inputs, in the units selected above:

InputValue
Displacement per revolution100.00 mL
Flow to the motor80.000 L/min
Pressure drop across the motor150.00 bar
Volumetric efficiency95.000 %
Mechanical efficiency92.000 %

Applying the formula below gives:

ResultValue
Output speed760.00 rpm
Output torque219.63 N·m
Output power17.480 kW

Open this example in the calculator and change any input.

Formula

\(n = \frac{Q\, \eta_v}{V_g}, \quad T = \frac{V_g\, \Delta p\, \eta_m}{2\pi}\)

Variables

Symbol Meaning SI unit
\(V_g\) Displacement per revolution m³
\(Q\) Flow to the motor m³/s
\(\Delta p\) Pressure drop across the motor Pa
\(\eta_v\) Volumetric efficiency -
\(\eta_m\) Mechanical efficiency -
\(n\) Output speed 1/s
\(T\) Output torque N·m
\(P\) Output power W

Method and standards

Displacement relations.

Where it is used

  • Winches, conveyors and drives.
  • Motor selection.

Common mistakes

  • Inlet pressure instead of the drop.
  • cc as L.

Assumptions and limits

  • Steady running.

References

  • Hydraulic motor relations T = V_g Δp η_m/(2π); n = Q η_v / V_g

Questions and answers

100 cc/rev, 80 L/min, 150 bar?

760 rpm, 220 N·m.

Why is torque per bar useful?

It is V_g/(2π): 1.59 N·m per bar per 100 cc/rev, before losses.

What is the starting torque?

Lower than running torque; makers give a starting efficiency.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.