Worked example
Example: Nickel 50 A, 30 min. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Plating current | 50.000 A |
| Plating time | 30.000 min |
| Area being plated | 1.5000 m² |
| Cathode current efficiency | 90.000 % |
| Molar mass of the deposited metal | 58.693 kg/kmol |
| Electrons per ion | 2.0000 - |
| Deposit density | 8,908.0 kg/m³ |
| Target thickness | 10.000 µm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Mass deposited | 24.637 g |
| Thickness | 1.8438 µm |
| Current density | 0.33333 A/dm² |
| Time for the target thickness | 162.71 min |
Open this example in the calculator and change any input.
Formula
\(m = \frac{I t \eta M}{n F}, \quad \delta = \frac{m}{\rho A}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(I\) | Plating current | A |
| \(t\) | Plating time | s |
| \(A\) | Area being plated | m² |
| \(\eta\) | Cathode current efficiency | - |
| \(M\) | Molar mass of the deposited metal | kg/kmol |
| \(n\) | Electrons per ion | - |
| \(\rho\) | Deposit density | kg/m³ |
| \(\delta_t\) | Target thickness | m |
| \(m\) | Mass deposited | kg |
| \(\delta\) | Thickness | m |
| \(i\) | Current density | A/m² |
| \(t_t\) | Time for the target thickness | s |
Method and standards
Faraday's law.
Where it is used
- Plating shops and repair of shafts.
- Estimating plating cost.
Common mistakes
- Ignoring efficiency.
- Area of one side only.
Assumptions and limits
- Uniform deposit.
- The metal is defined by its molar mass, electrons per ion and deposit density, entered by you; the defaults are nickel.
- With zero current the time to the target is not shown.
References
- Faraday's law m = I t η M/(n F); thickness = m/(ρA)
Questions and answers
50 A on 1.5 m² of nickel for 30 min at 90 %?
About 1.8 µm.
Chrome?
Hexavalent chrome baths have low efficiency (10–25 %), so they plate slowly.
Current density?
Keep within the bath supplier's range to avoid burning.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.