FireCADCalc

Heat Index (Apparent Temperature) from Temperature and Humidity

Heat index, the 'feels like' temperature in hot humid weather, from air temperature and relative humidity by the US National Weather Service method.

Inputs

Examples: 35 °C, 60 % (regression)25 °C, 40 % (simple form)40 °C, 10 % (dry adjustment)29 °C, 90 % (humid adjustment)

Results

NWS caution bands in °F: 80–90 caution, 91–103 extreme caution, 104–124 danger, 125 and above extreme danger. The regression is not valid far outside the range Steadman studied.

Heat index36.705°C
Simple (Steadman) estimate40.317°C
Caution band (0 none, 1 caution, 2 extreme caution, 3 danger, 4 extreme danger)2.0000

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 35 °C, 60 % (regression). The inputs, in the units selected above:

InputValue
Air temperature35.000 °C
Relative humidity60.000 %

Applying the formula below gives:

ResultValue
Heat index45.050 °C
Simple (Steadman) estimate36.122 °C
Caution band (0 none, 1 caution, 2 extreme caution, 3 danger, 4 extreme danger)3.0000

Open this example in the calculator and change any input.

Formula

\(HI = -42.379 + 2.04901523T + 10.14333127R - 0.22475541TR - 6.83783\times10^{-3}T^2 - 5.481717\times10^{-2}R^2 + 1.22874\times10^{-3}T^2R + 8.5282\times10^{-4}TR^2 - 1.99\times10^{-6}T^2R^2\)

Variables

Symbol Meaning SI unit
\(T\) Air temperature K
\(RH\) Relative humidity -
\(HI\) Heat index K
\(HI_s\) Simple (Steadman) estimate K
\(\text{band}\) Caution band (0 none, 1 caution, 2 extreme caution, 3 danger, 4 extreme danger) -

Method and standards

NWS regression in °F and % RH, with the simple formula first.

Where it is used

  • Heat stress planning for boiler houses, turbine halls and outdoor work.
  • Shift and rest scheduling.

Common mistakes

  • Using °C in the formula.
  • Reading it as an indoor design condition.

Assumptions and limits

  • Shade, light wind.
  • Simple form first: HI_s = ½[T + 61 + 1.2(T − 68) + 0.094R] (°F, %). If the average of HI_s and T is 80 °F or more the regression is used, with the NWS adjustments: subtract (13 − R)/4 · √[(17 − |T − 95|)/17] when R < 13 % and 80 ≤ T ≤ 112 °F; add (R − 85)/10 · (87 − T)/5 when R > 85 % and 80 ≤ T ≤ 87 °F.
  • Below about 80 °F, and above about 120 °F, a note says the value is outside the useful or fitted range.

References

  • US National Weather Service heat index: Steadman simple form and the Rothfusz regression with NWS adjustments (WPC, heat index equation)

Questions and answers

35 °C at 60 % RH?

The heat index is about 45 °C: danger.

Why does humidity make it feel hotter?

Sweat evaporates more slowly, so the body sheds less heat.

Does it apply in direct sun?

No; NWS values are for shade. Full sun can add several degrees.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.